• Up to 1,000 possible user codes (4-8 digits)
• Output: Form C relay, 1A@30VDC max.
• Output can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
• Up to 50 (01~50) possible temporary visitor codes, which can be programmed for onetime or limited-time use (1~99 hours)
• Durable and attractive stainless-steel faceplate
• Programmable delayed egress input lets users exit the premises without keying in the code
• EEPROM Memory protects programmed information in case of power loss
• 12~24 VDC/VAC Auto-adjusting operation
• Tamper output: N.C. Dry contact, 50mA@24VDC max.
• Mounts to a standard single-gang back box (surface-mount back box included)
• Programmable wrong-code lockout
• Real-time clock to auto-disable access at specific times
• All features are programmed directly from the keypad: No need for an external programmer

• 12~24 VAC/VDC operation
• 1,010 Users (Output #1: 1,000 users, Output #2: 10 users)
• 2 Form C relays, each rated 1 Amp @ 30VDC
• Each relay has programmable output time from 1~99 seconds or toggle
• Output #2 can be programmed for use with a doorbell
• 2 Egress inputs and 1 door sensor input
• Backlit keys for easy nighttime use
• Two multi-colored status LEDs
• Able to mount to a single-gang back box
• All features are programmed directly from the keypad - no need for an external programmer
• EEPROM memory protects programmed information in case of power loss
• Optical tamper for added security
• Circuitry is potted with epoxy for outdoor use
• IP65 Weatherproof rating, rugged aluminum construction

The sealed environment 212SE style keypad features a brushed metal housing that has been treated to resist corrosion and an all metal Braille, alpha-numeric keypad. There is an internal sounder that is used to indicate key press feedback, and a bi-color LED to indicate operation. The housing has been designed to mount directly on a standard single-gang electrical box, or to most flat surfaces.

Features

• 120 users
• Indoor/outdoor self contained brushed metal housing
• Surface mount vandal resistant design
• One piece housing suitable for wall, post, or gooseneck mounting
• Durable metal Braille alpha-numeric keys
• 4 on board programmable timed relays
• Tamper loop functionality mode: 212, 232

SMK-V is an outdoor IP65-rated vandal-resistant metallic RFID reader with a back-lit keypad.
SMK-V has a built-in 12V relay contact which can be connected directly to either an electric strike or magnetic door lock.

For the highest level of security and programming flexibility, SMK-V also has a built-in Wiegand-Out port which can be connected to most any access control panel (including ZKAccess C3 and InBio door controllers).

SMK-V comes standard with a built-in ZKAccess 125 KHz 26-bit RFID card reader. Mifare card reader option available.

Features

• IP65-rated vandal-proof metallic enclosure
• Standard ZK 125 kHz 26-bit card reader.
• Optional Mifare card reader available.
• Relay outputs for electric lock and alarm
• Auxiliary inputs for door status sensor and exit switch

• Wiegand and RS232 (simultaneous)
• 6 to 8 in. (15 to 20cm) read range
• 4.6 x 3.1 x 0.65 in. (11.7 x 7.9 x 1.7cm) in size
• Power requirement: 5 ~ 12 VDC
• Single Gang Box Mount; Customizable Tri-state LED

• Compatible with all ENFORCER 315MHz transmitters
• Use to control garage door opener, house lights, alarm control panel, or other devices via remote control
• 10A @ 24VDC or 120VAC per channel, NO/NC/COM
• Frequency 315MHz
• This revolutionary receiver incorporates:
  • Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
  • HIGHER SENSITIVITY for greater operating distances.
  • UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
  • GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
• LED indicates RF reception, learn mode entered, transmitter learned, memory cleared
• Mode switch for easy transmitter learning
• Learns up to 15 transmitters
• 5 Output modes (programmable):
  • 4-Second momentary,
  • 1-Second momentary,
  • Toggle,
  • Validity: receiver outputs for as long as the transmitter button is pressed,
  • Latch
• Screw terminals for simple connection

Affordable single door access control keypad designed to meet the indoor flush mount needs of lighter volume access control environments. There are three LEDs to indicate operation status and provide the user with visual PIN entry confirmation. The i style keypad mounts to most standard single-gang electrical back boxes.

Features

• 120 users
• Single gang design
• 1 SPDT 2 amp relay and three 50mA negative voltage outputs
• Optional 293 relay board converts 3 voltage outputs to SPDT relays
• Indoor use only
• Functionality mode: 212, 232