|◀ 541 - 552 of 747 ▶|
View:

  • 16 AWG backplane.
  • Includes mounting hardware.
  • Accommodates PDK PM-07-EIOE-E boards with or without Altronix power supplies: PDK PM-07-EIOE-E boards,
  • Altronix Power Supplies
  • Simplifies board layout and wire management
  • 16 AWG galvanized steel

Item#:
TPD1
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Altronix T3MK75F16D Trove Mercury kit is pre-assembled and consists of Trove enclosure with factory installed Altronix power supply/chargers and sub-assemblies. This kit accommodates various combinations of Mercury boards for up to sixteen (16) doors in a single enclosure.

  • Input: 120VAC 60Hz/8.0A.
  • Output:
    • 12VDC @ 9.3A and 24VDC @ 9.2A max current.
    • Sixteen (16) Fail-Safe/Fail-Secure or Dry Form "C" Outputs
  • Fully assembled kit includes:
    • Trove3 enclosure with TM3 backplane
    • One (1) eFlow104NB - Power Supply/Charger
    • One (1) eFlow102NB - Power Supply/Charger
    • Two (2) ACM8CB - PTC Protected Access Power Controllers
    • One (1) PD8ULCB - PTC Protected Power Distribution Module
    • One (1) RSB2 - Rocker Switch Bracket with Two (2) Rocker Switches
  • Back-up Battery:
    • Capacity: 12AH / 12VDC (Up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
    • Type - Sealed lead acid or gel type.
    • Fuse Rating: 15A/32V
    • Failover - Upon AC loss, instantaneous.
  • Supervision:
    • AC Failure - Form "C" contacts.
    • Battery - Form "C" contacts.
    • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
  • LED Indicators:
    • Input - 120VAC is present.
    • DC Output - Powered.
    • Battery - Discharged or not connected.

Item#:
T3MK75F16D
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Altronix T2MK7F8 is pre-assembled and consists of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies. This kit also accommodates various combinations of Mercury boards for up to eight (8) doors in a single enclosure.

  • Input: 120VAC 60Hz/4.5A.
  • Output:
    • 24VDC up to 9.2A max current.
    • Eight (8) Fail-Safe/Fail-Secure or Dry Form "C" Outputs
  • Fully assembled kit includes:
    • Trove2 enclosure with TM2 backplane
    • One (1) eFlow104NB - Power Supply/Charger
    • One (1) ACM8 - Fused Access Power Controller
    • One (1) VR6 - Voltage Regulator
    • One (1) PDS8 - Dual Input Power Distribution Module
  • Back-up Battery (not included):
    • Capacity: 12AH / 12VDC (Up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
    • Type - Sealed lead acid or gel type.
    • Fuse Rating: 15A/32V
    • Failover - Upon AC loss, instantaneous.
  • Supervision:
    • AC Failure - Form "C" contacts.
    • Battery - Form "C" contacts.
    • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
  • LED Indicators:,ul>
  • Input - 120VAC is present.
  • DC Output - Powered.
  • Battery - Discharged or not connected.

Item#:
T2MK7F8
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The 2005M3 SMART Pac III is an in-line power controller that is able to receive input voltages from 12 to 32V AC or DC. It has a built-in bridge rectifier. The continuous duty timer reduces initial voltage by 25% to extend the life of the electric strike. Includes built-in resettable fuse, MOV, voltage regulation and input status LED.

  • Accepts wide range of input voltage: 12-32 Volts AC* or DC
  • Output 12VDC or 24VDC, depending on input voltage
  • Smart LED Input Status Indicator
  • Built-in bridge rectifier
  • Built-in surge protection / voltage regulation
  • Supports fail secure or fail safe configured electric strikes
  • Continuous duty: reduces initial voltage by 25% after a fixed period of time, to provide cooler more efficient operation of strike
  • Self-resetting over-current protection
  • Configures strike eliminating need for voltage specific pigtails
  • Extends the warranty of HES electric strikes

Item#:
10270406
You must be logged in to order this item. Log in here

  • 16 AWG backplane.
  • Includes mounting hardware.
  • Accommodates the following ZKTeco access controllers with or without Altronix power/accessories: ZKTeco: SMB/Pro Series C3 and inBio 1,2 and 4 Door Controllers, Altronix Power Supplies, Altronix Sub-Assemblies
  • Simplifies board layout and wire management
  • 16 AWG galvanized steel

Item#:
TZ2
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 541 - 552 of 747 ▶|
View:
(Denotes required field.)