S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
You must be logged in to order this item.
Log in here
The TFC-110S20D3i intelligent fiber converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength Single Mode SC-Type fiber converter that spans distances up to 20 km (12.4 miles). This module must be used with the TFC-110S20D5i module. Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX (SC Simplex Type) port.
- Must use with TFC-110S20D5i
- Compliant with IEEE 802.3u 100Base-TX and 100Base-FX standards
- 1 x 10/100Base-TX RJ-45 port
- 1 x 100Base-FX single-mode bi-directional simplex-SC type fiber port
- Port level SNMP management support
- Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on / off and receive link down information via management module TFC-1600MM and chassis TFC-1600
- Dip switch controls: Fiber (Full / Half-Duplex), UTP (Auto negotiation / Manual), Speed (10 Mbps / 100 Mbps),
- Copper (Full / Half-Duplex), LLR (Enable / Disable), and LLCF (Enabled / Disable)
- Link Loss Carry Forward (LLCF) support
- Link Loss Return (LLR) support
- Status LED indicators for Power and Link / Activity
- Removable metal enclosure
- Wall mountable
- Functions as a standalone converter or with the TFC-1600 fiber chassis
Item#:
TFC-110S20D3I
You must be logged in to order this item.
Log in here
TRENDnet's 1000BASE-T RJ-45 Copper SFP Module, model TEG-MGBRJ, converts a standard SFP slot into a RJ-45 gigabit port for additional copper connectivity. This SFP module works with standard SFP slots commonly found in network switches and fiber media converters. Save on equipment costs by repurposing a switch’s unused SFP slots for copper connectivity.
- Compliant with IEEE 802.3ab Gigabit Ethernet
- Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
- Supports data rates of up to 1.25Gbps
- Transmission distance of up to 100m (328 ft.)
- Hot-Pluggable
- RJ-45 connector
Item#:
TEG-MGBRJ
You must be logged in to order this item.
Log in here
The 10G-MM-DX-LC 10 Gb SFP+ Module MMF DX LC is designed for use with Luxul Ethernet switches that have an SFP+ port. This Small Form-Factor Pluggable+ (SFP+) module operates at 850nm wavelength in Duplex (DX) mode to provide 10 Gigabit connectivity at distances up to 300 meters when using OM3 Multi-Mode (MM) fiber optic cable. The module can be used in the SFP+ slot of any compatible Luxul switch. It is provided particularly for connecting Luxul managed switches that have 10 Gigabit uplink/stacking ports.
- 10 Gigabit bi-directional performance
- Multi-mode Mini GBIC module operates at 850nm
- Duplex LC connector
- Maximum transmission distance of 300 meters
- Use with OM3 fiber
- Compliant with IEEE 802.3z standards
- Hot pluggable
Item#:
10G-MM-DX-LC
You must be logged in to order this item.
Log in here
The 1000Base-LX Industrial SFP Single-Mode LC Module, model TI-MGBS10, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and fiber converters. The TI-MGBS10 is compatible with Duplex LC fiber connector types and supports gigabit single-mode fiber connections at distances of up to 10 kilometers (6.2 miles).
- Compliant with IEEE 802.3z Gigabit Ethernet
- ANSI Fiber Channel compliant
- Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
- Wide operating temperature range of -40°– 85 °C (-40° – 185 °F)
- Supports data rates of up to 1.25Gbps
- Transmission distance of up to 10km (6.2 miles)
- Low Electromagnetic Interference (EMI) design
- Supports 1310nm single-mode network transmissions
- Duplex LC optical interface
- Low power consumption
Item#:
TI-MGBS10
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)