S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
Item#:
151382
You must be logged in to order this item.
Log in here
TRENDnet's 100/1000BASE-T to SFP Media Converter, model TFC-1000MGA, is a reliable Plug-and-Play Fiber-to-Ethernet converter in a compact form factor. This versatile fiber converter supports both Multi-Mode (SX) and Single-Mode (LX) fiber standards for transmission distances of up to 80 kilometers (50 miles).
The Mini-GBIC slot and Gigabit Ethernet port Auto-Negotiate between 100 and 1000Mbps transmission speeds. Diagnostic LEDs on the front of the converter convey device status. Control Auto-Negotiation (Forced/Auto-Negotiation) and Link Loss Return (Enable/Disable) with an internal dip-switch. This sturdy metal housed converter can be installed as a standalone unit and is compatible with TRENDnet's expandable 16-Bay Fiber Converter Chassis System, model TFC-1600.
- Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-SX/LX standards
- 1 x 10/100/1000Base-T RJ-45 port
- 1 x 100Base-FX/1000Base-SX/LX Mini-GBIC slot
- Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
- Support LLCF (Link Loss Carry Forward, Link Pass Through)
- Monitor and configure Ethernet or Fiber’s duplex mode, LLR, and receive link down information via management module TFC-1600MM and chassis TFC-1600
- Status LED indicators for Power, Link/Activity and Fail
- Wall mountable
- Compatible with TRENDnet’s 16-Bay Fiber Converter Chassis System, model TFC-1600 (holds up to 16 TFC series Media Converters)
Item#:
TFC-1000MGA
You must be logged in to order this item.
Log in here
1 x 1000Base-T RJ45 Port to 1 x SFP Port, PoE+ Injector
Item#:
508216
You must be logged in to order this item.
Log in here
- Aiphone AX system compatible
- 10 Bit Video Digital Encoding
- Real Time Video, Audio & Data Transmission
- 7 MHz Video Bandwidth
- Meets RS-250C Short Haul Transmission Specifications
- NTSC, PAL, SECAM Compatible
- Bi-Directional Audio, Contact Closures
- Wide Optical Dynamic Range: Eliminates Need For Optical Attenuators
- Laser Based Systems for Multimode and Singlemode
- Surface Mount Technology (SMT) for High Reliability and Repeatability
- SpectraSmart PC Based Network Management
- SpectraView Fault / Setup Firmware
- Local LED Status Indicators to Monitor Critical System Diagnostics for Performance Parameters
- ST, FC Optical Connector
- Hot Swappable Cards
- Laser Back - Biased Photo Detector Circuitry for Stable Optical Output Over Full Temperature Range.
- 75 Ohm BNC Video Connector (Gold Center Pin)
- Meets EIA RS-170, RS-343A Formats
- Screw Terminals for Audio & Contacts
Item#:
SR-AIPHONEAX1-5C/ST
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
The TFC-110S60 Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter spanning distances up to 60km (37.2 Miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (SC-Type).
- Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX / 100Base-FX standards
- 1 x 10/100Base-TX auto-negotiation RJ-45 port
- Auto-negotiation 10/100Mbps connection speed and Half/Full-duplex mode on TX port
- Auto MDIX for 10/100Base-TX port
- 1 x 100Mbps fiber port with single-mode SC-type connector
- Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
- Provides dip-switch for full and half duplex selection on fiber port
- Wall mountable
- Optional 19" system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters
Item#:
TFC-110S60
You must be logged in to order this item.
Log in here
1000Base-T RJ45 Port to 1000Base-LX (SC) Single-Mode, 20 km (12.4 mi.), PoE+ Injector
Item#:
508209
You must be logged in to order this item.
Log in here
The 1G-RJ45 is a 1 Gb SFP RJ-45 module designed for use with Luxul Ethernet switches that have an SFP port. This RJ-45 connector Small Form-Factor Pluggable (SFP) module supports distances of up to up to 100 m on standard CAT 5 UTP copper cable for 1 Gigabit connectivity to any device connected into the SFP slot of any compatible Luxul switch.
- Compliant with IEEE 802.3ab/ Gigabit Ethernet Standard
- Compliant with SFP MSA specifications
- Hot-pluggable SFP footprint
- 10/100/1000BASE-T with SGMII interface
- Supports MDIX
Item#:
1G-RJ45
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
TRENDnet's TI-F10S30 is a compact IP40 rated 100Base-FX fiber converter with hardened components rated for extreme industrial environments. It accommodates long distance networking with 100Base-FX Single-Mode fiber over distances of up to 30 km (18.6 miles). Both DIN-rail and wall mount hardware is included. Power supply sold separately: model TI-M6024.
- Hardened IP40 rated compact housing
- 100Base-FX Single-Mode fiber over distances of up to 30 km (18.6 mi.)
- SC-type fiber port
- Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
- Overload current protection
- Includes DIN-rail and wall mounts
- Power supply sold separately (model TI-M6024)
Item#:
TI-F10S30
You must be logged in to order this item.
Log in here
TRENDnet's TFC-1000MSC, Intelligent Fiber Converter, is compatible with the TFC-1600 chassis system or functions as a standalone unit. This converter is a Multi-Mode SC-Type fiber converter that supports SNMP (when used TFC-1600MM) and spans distances up to 550 m (1,800 ft.). Ports include a 1000Base-T (RJ-45) port and a 1000Base-SX (SC-Type) fiber port.
- Functions as a standalone converter
- Compatible with TRENDnet’s TFC-1600 fiber chassis system
- SC-type 1000Base-SX Multi-Mode fiber port
- Fiber networking over distances of up to 550 meters (1800 ft.)
- 2 Gbps switching capacity
- LEDs convey power and copper/fiber link and activity
Item#:
TFC-1000MSC
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
(Denotes required field.)