The LX-402 is robust, weatherproof and specifically designed for short-range outdoor applications, such as triggering lighting or cameras. With advanced features such as sensitivity and range adjustment and a built-in light sensor providing day and night modes, the LX-402 is highly versatile. With Double Conductive Shielding, the LX-402 is resistant to interference from foreign light sources such as the sun and car headlights.

Features:

• Used to trigger lighting or cameras
• Double conductive shielding
• Selectable detection patterns (Pet Alley or Multi-Level)
• Area-masking strips
• Sensitivity selection switch
• Selectable pulse count (test or 2)
• Day & night modes

The AX-200TF short range photoelectric detector is compact in design with selectable beam frequencies. The selectable beam frequencies can be used to avoid unwanted crosstalk that can occur when using multiple photobeams over long distances or for beam stacking applications. The AX-200TF also carries the IP65 high durable structure, which prevents water, dust or bugs from getting into the unit. The ideal optical pitch design reduces false alarms due to accidental beam interruption by falling leaves, birds, and so on. These features deliver performance with higher reliability in severe outdoor environmental condition.
Replacment Lens (Covers) Optex part number is AX-TN/TFCOVER. (Sold Individually)

Features:

• Selectable 4 channel beam frequencies
• Four step alarm indicator LED
• Environmental disqualification circuit
• IP65 structure
• Lightning and surge protection
• Anti-frost hood cover
• 99% beam blocking stability
• A.G.C circuit
• Adjustable beam interruption time

• For outdoor gates, garage doors, etc.
• Weatherproof (IP55) construction for indoor/outdoor use
• Anti-condensation housing
• Dual-color LED alignment system
• Form C relay: 500mA@30VAC/VDC
• Tamper switch: N.C. 500mA@30VAC/VDC
• 31/4 in. (82mm) Round reflector included
• Compact size
• Monitored output: N.C., 10k Resistor

The addressable passive infrared detector (AMB300) employs a large, multi-beam lens design, patented Multi-Level Signal Processing (MLSP) and temperature compensation to ensure human targets are identified. To ensure trouble-free operation for many years, special attention is given to false alarm immunity against RF, static and electrical transients. The detector uses a two-wire connection to the control panel that helps to reduce installation time and cost. The low current draw of the detector helps maximize the number of devices that can be attached to an addressable loop.

Features:

• Patented MLSP (Multi-Level Signal Processing)
• Interchangeable lenses: wall-to-wall lens (standard), curtain lens, pet-immune lens and corridor lens
• Built-in tamper switch
• Based on the Bravo 3 hardwire motion detector

Designed for outdoor and indoor use, The MS-100E offers the choice of Wide Angle, Horizontal Curtain, Vertical Curtain and Long Range detection up to 20m from within a single discreet housing. 180° Rotatable optics allow the unit to be installed in almost any position; mount vertically for standard detection or horizontally as a door sensor.

DAY/NIGHT sensing is included for automatic control, and a variable timer relay with NO/NC outputs ideal for triggering CCTV, lighting or speech units in commercial, domestic and industrial applications.

Features:

• Supplied with wide angle and long range lenses
• Choose from 4 detection patterns
• Can be mounted vertically or horizontally
• Sensor head rotates a full 180 degrees
• Day/night sensing
• Variable output relay timer (approx. 2 sec to 5 min)