T3CV3 accommodate various combinations of CDVI boards with or without Altronix power supplies and accessories for access control systems.

• 16 AWG backplane.
• Includes mounting hardware.
• Accommodates the following CDVI Atrium controllers with or without Altronix power/accessories: CDVI Atrium A22, Altronix Power Supplies, Altronix Sub-Assemblies
• Simplifies board layout and wire management
• 16 AWG galvanized steel

• 16 AWG backplane.
• Includes mounting hardware.
• Accommodates the following Honeywell NetAXS access controllers with or without Altronix power/accessories: Honeywell NetAXS - NX4PCB, NetAXS-123, NXD1 or NXD2, NX4IN or NX4OUT, Altronix Power Supplies, Altronix Sub-Assemblies
• Simplifies board layout and wire management
• 16 AWG galvanized steel

Altronix T2MK7F8DQ is pre-assembled and consists of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies. This kit also accommodates various combinations of Mercury boards for up to eight (8) doors in a single enclosure.

• Input: 120VAC 60Hz/4.5A.
• Output:
  • 24VDC up to 9.2A max current.
  • Eight (8) Fail-Safe/Fail-Secure or Dry Form "C" Outputs
• Fully assembled kit includes:
  • Trove2 enclosure with TM2 backplane
  • One (1) eFlow104NB - Power Supply/Charger
  • One (1) LINQ2 - Network Communications Module
  • One (1) ACM8CB - PTC Access Power Controller
  • One (1) VR6 - Voltage Regulator
  • One (1) PDS8CB - Dual Input Power Distribution Module

Altronix T2MK75F16 is pre-assembled and consists of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies. This kit also accommodates various combinations of Mercury boards for up to sixteen (16) doors in a single enclosure.

• Input: 120VAC 60Hz/8A.
• Output:
  • 12VDC up to 9.3A and 24VDC up to 9.2A max current.
  • Sixteen (16) Fail-Safe/Fail-Secure or Dry Form "C" Outputs
• Fully assembled kit includes:
  • Trove2 enclosure with TM2 backplane and TMV2 door backplane
  • One (1) eFlow104NB and One (1) eFlow102NB - Power Supply/Charger
  • Two (2) ACM8 - Fused Access Power Controller
  • One (1) PD8UL - Power Distribution Module
• Back-up Battery (not included):
  • Capacity: 12AH / 12VDC (Up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
  • Type - Sealed lead acid or gel type.
  • Fuse Rating: 15A/32V
  • Failover - Upon AC loss, instantaneous.
• Supervision:
  • AC Failure - Form "C" contacts.
  • Battery - Form "C" contacts.
  • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
• LED Indicators:
  • Input - 120VAC is present.
  • DC Output - Powered.
  • Battery - Discharged or not connected.

Trove2 enclosure with TZ2 Altronix/ZKTeco backplane:

• Backplane accommodates a combination of Altronix and ZKTeco controllers and accessories: ZKTeco: SMB/Pro Series C3 and inBio 1,2 and 4 Door Controllers, Altronix Power Supplies, Altronix Sub-Assemblies
• Includes Altronix Trove2 Enclosure and one (1) removable TZ2 backplane

Altronix T2MK3F4Q is pre-assembled and consists of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies. This kit also accommodates various combinations of Mercury boards for up to four (4) doors in a single enclosure.

• Input: 120VAC 60Hz/3.5A.
• Output:
  • 24VDC up to 5.8A max current.
  • Four (4) Fail-Safe/Fail-Secure or Dry Form "C" Outputs
• Fully assembled kit includes:
  • Trove2 enclosure with TM2 backplane
  • One (1) eFlow6NB - Power Supply/Charger
  • One (1) LINQ2 - Network Communications Module
  • One (1) ACM4 - Fused Access Power Controller
  • One (1) VR6 - Voltage Regulator
  • One (1) PDS8 - Dual Input Power Distribution Module
• Back-up Battery (not included):
  • Capacity: 12AH / 12VDC (Up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
  • Type - Sealed lead acid or gel type.
  • Fuse Rating: 10A/32V
  • Failover - Upon AC loss, instantaneous.
• Supervision:
  • AC Failure - Form "C" contacts.
  • Battery - Form "C" contacts.
  • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
• LED Indicators:
  • Input - 120VAC is present.
  • DC Output - Powered.
  • Battery - Discharged or not connected.

• 16 AWG backplane.
• Includes mounting hardware.
• Accommodates the following Honeywell power controllers with or without Altronix power/accessories: PRO32IC, PRO32R2, PRO32IN, PRO32OUT, PW51KEN, PW6K1IC, PW6K1IN, PW6K1OUT, PW6K1R2, PRO32E1PS, PW6K2E2PS, PRO22MX8,
• Altronix Power Supplies, Altronix Sub-Assemblies
• Simplifies board layout and wire management
• 16 AWG galvanized steel

• 16 AWG backplane.
• Includes mounting hardware.
• Accommodates the following Kantech controllers with or without Altronix power/accessories: Kantech - up to (3) KT-400, up to (4) KT-300, up to (4) KT-MOD-INP16 or KT-MOD-OUTP16, Altronix Power Supplies, T1618300
• Transformer, Altronix Sub-Assemblies
• Simplifies board layout and wire management
• 16 AWG galvanized steel