Altronix T2MK75F16DQ is pre-assembled and consists of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies. This kit also accommodates various combinations of Mercury boards for up to sixteen (16) doors in a single enclosure.

• Input: 120VAC 60Hz/8A.
• Output:
  • 12VDC up to 9.3A and 24VDC up to 9.2A max current.
  • Sixteen (16) Fail-Safe/Fail-Secure or Dry Form "C" Outputs
• Fully assembled kit includes:
  • Trove2 enclosure with TM2 backplane and TMV2 door backplane
  • One (1) eFlow104NB and (1) eFlow102NB - Power Supply/Chargers
  • One (1) LINQ2 - Network Communications Module
  • Two (2) ACM8CB - PTC Access Power Controller
  • One (1) PD8ULCB - Power Distribution Module

• 16 AWG backplane.
• Includes mounting hardware.
• Accommodates the following HID VertX controllers with or without Altronix power/accessories: HID VertX V100, V200, V300, V1000, V2000, and Genetec Synergis Cloud Link, Altronix Power Supplies, Altronix Sub-Assemblies
• Simplifies board layout and wire management
• 16 AWG galvanized steel

Altronix T2MK75F16Q is pre-assembled and consists of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies. This kit also accommodates various combinations of Mercury boards for up to sixteen (16) doors in a single enclosure.

• Input: 120VAC 60Hz/8A.
• Output:
  • 12VDC up to 9.3A and 24VDC up to 9.2A max current.
  • Sixteen (16) Fail-Safe/Fail-Secure or Dry Form "C" Outputs
• Fully assembled kit includes:
  • Trove2 enclosure with TM2 backplane and TMV2 door backplane
  • One (1) eFlow104NB and One (1) eFlow102NB - Power Supply/Charger
  • One (1) LINQ2 - Network Communications Module
  • Two (2) ACM8 - Fused Access Power Controller
  • One (1) PD8UL - Power Distribution Module
• Back-up Battery (not included):
  • Capacity: 12AH / 12VDC (Up to 4 within enclosure); 40 AH / 65 AH (requires separate enclosure).
  • Type - Sealed lead acid or gel type.
  • Fuse Rating: 15A/32V
  • Failover - Upon AC loss, instantaneous.
• Supervision:
  • AC Failure - Form "C" contacts.
  • Battery - Form "C" contacts.
  • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
• LED Indicators:
  • Input - 120VAC is present.
  • DC Output - Powered.
  • Battery - Discharged or not connected.