|◀ 289 - 300 of 397 ▶|
View:

Features

  • Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
  • Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
  • Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
  • Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
  • Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZKs biometric reader controllers.
  • Easy-to-use and intuitive programming with ZKAccess Software
  • System management by browser from client PCs. No need to install software on each client
  • Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
  • Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
  • Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.

Item#:
US-C3-400
You must be logged in to order this item. Log in here

Features

  • Net2 Entry Standard monitor
  • Net2 Entry - Control unit
  • Net2 Entry - Panel
  • Packaging - box for 5 cabinet PSUs
  • Label - product serial number label 27x10mm

Item#:
337-900-US
You must be logged in to order this item. Log in here
The AdvantageDKS II controllers are available in three configurations: post mount, desk mount, and raintight enclosure. Post-mount models are housed in heavy powder-coated steel enclosures with stainless-steel faceplates and metal keypads, the desk-mount model cabinets (interior use only) are made of black powder-coated steel, and the raintight models are mounted inside standard raintight electrical enclosures.
Each AdvantageDKS II controller allows the user to randomly generate up to 1,000 five-digit codes and automatically enter them into memory. These codes can be printed out using an RS-232 serial-port printer. The controller will also report time, date, code number entered, relay activated, and valid/invalid code status.
  • Programmable five-digit codes: 1000-code capacity
  • Two slave keypad ports, 26-bit Wiegand (see RemotePro KP)
  • Programmable personal master code, latch code, and sleep code
  • Split relay function allows activation of two separate access points
  • Optional camera (intercom model only)
  • "3 strikes, you’re out" security
  • True anti-passback
  • 1000-code transaction buffer
Item#:
24-1000D
You must be logged in to order this item. Log in here

  • True Full Duplex Communication.
  • Stores up to 3000 telephone numbers and names.
  • Stores up to 255 area codes.
  • Transaction buffer stores last 8000 events.
  • Stores up to 8000 access card codes - dependent on system memory.
  • 31 security (permission) levels, 29 programmable with 4 time zones each.
  • 8 hold open time zones.
  • Three anti-pass back configurations: passive, active and trap.
  • Elevator control (note 1) for up to 8 elevators, each serving 64 floors.
  • Expandable (note 2) to control up to 48 entry points.
  • 4-digit entry codes, one for each telephone number.
  • 3 form C dry contact relays.
  • Single-line directory display uses super-twist LCD with 1/2-inch characters.
  • EEPROM memory chip.
  • Requires touch-tone, loop-start central office phone line.
  • Two 16 VAC, 20 VA power transformers supplied.
  • FCC (US): DUF6VT-12874-OT-T
  • DOC (CAN): 1736 4528 A
  • Compliant with UL 294. ETL listed.

Item#:
1838-081
You must be logged in to order this item. Log in here
  • 4G LTE cellular
  • Ascent Connect integration
  • Location-Based Access Control (LBAC)
  • Control 1 gate/door
  • Cloud-based access control management
  • Up to 10,000 app, text, and voice users
  • Push and/or email event and status notifications
  • 7-day timers
  • Holiday timers and special-event timers
  • Temporary users with permission limits
  • Audit trail with detailed reports
  • "Do Not Disturb" mode
  • IP65-rated polycarbonate enclosure
Item#:
25-LT
You must be logged in to order this item. Log in here

ZKAccess systems are built on flexible, open technology to provide management, real-time monitoring, and control of your access control system- all from a web browser. Simply download one instance of our free Windows-based v5.3 software (on a customers computer or ZKAccess InBridge appliance) and then manage the software from any computers web-browser which has administrative rights.

Features

  • Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
  • Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
  • Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
  • Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
  • Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZKs biometric reader controllers.
  • Easy-to-use and intuitive programming with ZKAccess Software
  • System management by browser from client PCs. No need to install software on each client
  • Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
  • Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
  • Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.

Item#:
US-C3-200
You must be logged in to order this item. Log in here
Altronix THWD2 door backplane for Trove2 and Trove3 enclosures accommodates a variety of Honeywell ProWatch/WinPak boards for access systems of up to twelve (12) doors. THWD2 simplifies board layout and wire management, reducing installation time and labor costs.
  • Simplifies board layout and wire management.
  • 16 AWG galvanized steel.
  • Accommodates the following Honeywell power controllers:
    • Up to six (6) PRO32IC, PRO32R2, PRO32IN, PRO32OUT, PW6K1IC, PW6K1R2, PW6K1IN, PW6K1OUT modules.
    • One (1) PRO22MX8 module.
Item#:
THWD2
You must be logged in to order this item. Log in here
  • May be used as make/break relay, sequencer or any other application where time delay is needed
  • Wet output function
  • Pushbutton fault indicator (diagnostics)
  • Preprogrammable to save time on installation
Item#:
53DG94
You must be logged in to order this item. Log in here
Each master controller is designed to operate two 26 bit, wiegand output card readers (see the AAS RemotePro CR line), where all programming and auditing is done from the master station.
The AdvantageDG master controllers are available in two configurations: desk cabinet and raintight station. The desk cabinet (interior use only) is enclosed in a black metal housing that sits conveniently on the desk, allowing all programming to be done from the comfort of an office, while the raintight station is mounted inside of a standard electrical raintight enclosure.
Each of the AdvantageDG master stations has a 1000 transaction memory buffer that can be printed on an RS-232 serial port printer (AAS #21-045 or #21-047). The controller will report time, date, card number entered, gate activated (when split relay function is enabled) and valid / invalid card. When the AAS #21-047 desk printer is used, the invalid cards can be printed in red ink on the report. So whether you have existing 26 bit wiegand card readers or need new ones, the AdvantageDG controller gives you the flexibilty you need.
  • Input: 16.5 VAC (transformer included)
  • Output: 2 relays, n/o or n/c contact; 1 -99 seconds
  • Dimensions: 8.00h x 6.00w x 4.00d
  • Ship weight: 7 lbs.
Item#:
23-2000RT
You must be logged in to order this item. Log in here

  • Designed to release or secure and monitor one electric lock
  • 1/2" red LED operates on 12 or 24VAC or VDC
  • D.P.D.T. illuminated latching push button with hi-brightness built-in LED
  • Switch LED operates on 12 or 24VAC or VDC
  • Switch contacts rated 3 Amps @35VDC or 120VAC
  • Components mounted on standard single - four gang electrical wall plate
  • Depth behind plate is 1-1/2"
  • Switch and LED terminated with colored leads
  • Green and yellow LEDs available
  • Custom switch legends available

Item#:
SLP-8L
You must be logged in to order this item. Log in here
  • 1 Desk-mount Controller (24-1000d)
  • 2 RemotePro KP Post-mount Keypads (12-000)
  • 1 Desktop Printer with Cable (21-047)
Item#:
24-1000K
You must be logged in to order this item. Log in here

Trove1M1 accommodates various combinations of Mercury boards with or without Altronix power supplies and accessories for access systems.

Trove1 enclosure with TM1 Altronix/Mercury backplane
Backplane accommodates a combination of Mercury controllers with or without Altronix accessories::

  • Mercury: EP1502, MR52, MR16IN, MR16OUT
  • Altronix Power Supplies
  • Altronix Sub-Assemblies
  • Includes Altronix Trove1 Enclosure and one (1) removable TM1 backplane
Trove1 Enclosure
  • 16 AWG grey enclosure with a single 1.5 in. center knockout on the top of the enclosure plus (9) 2-Stage knockouts for 0.75 or 1 in. conduit.
  • Includes: One (1) cam lock, one (1) tamper switch and mounting hardware.

Item#:
TROVE1M1
You must be logged in to order this item. Log in here
|◀ 289 - 300 of 397 ▶|
View:
(Denotes required field.)