Glossy front/ back for dye-sub printing (Minimum Qty 50, Increment Qty 50)

• Single timed output
• Double pole, double throw
• Adjustable sensor sensitivity
• Adjustable relay time: 1/2-15 seconds
• Manual trip test button
• Supports any sensing device with N.O., dry, floating relay contact
• Supports up to 4 sensor probes
• Supports up to 12 sounders
• Includes 12-volt transformer
• Metal enclosure dimensions: 5.5″ x 5.5″ x 2″
• Circuit board dimensions: 4.25″ x 3.25″
• Circuit board (called CT-3B) may be purchased without enclosure
• CT-3BG is conformal coated circuit board for free exit
• Part of the DriveGuard, DriveGuard Integrator, and Pioneer Free Exit systems

The MD-D02 is an optional expansion board for use with Rosslares state-of-the-art family of networked access controllers, specifically the AC -225 model.

The expansion board adds an additional two Reader or keypad inputs; four relay outputs and four supervised inputs to the access control panel. In addition, it is possible to add any keypad or biometric reader that supports the Wiegand or Clock-and-Data transmission formats.

Features

• Two multi format reader outputs
• Four supervised, 4-state, dual EOL inputs input relays
• 4x 5A Form-C relay outputs
• Optional expansion for AC-225

The DS160 Series consists of the DS160 Detector (light gray) and the DS161 Detector (black) specifically designed for Request-to-exit (REX) applications. With features such as timers, door monitor with sounder alert, and pointable coverage, the DS160 and DS161 have the flexibility to meet the most stringent REX requirements. The exclusive Sequential Logic Input (SLI) provides added security that is not offered in any other REX device.

Features

• Door monitor with sounder alert
• Sequential Logic Input (SLI)
• Internal vertical pointability
• Wrap-around coverage pattern with precise pattern control
• Up to 64 second adjustable latch time
• Selectable relay trigger mode
• Selectable fail-safe or fail-secure modes
• Adjustable sounder volume
• Activation LED

AL600ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC, 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or it may be used to trigger auxiliary devices.

Input

• Input 115VAC, 60Hz, 3.5A.
• Input fuse rated @ 3.5A/250V.
• Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C.supervised trigger input and polarity reversal trigger input.

AL168CB Multi-Output Power Supply provides 16VAC or 18VAC distributed via eight (8) PTC protected outputs for powering multiple security system or access control panels.