Altronix ACM4E converts one (1) 12 to 24 VAC or VDC input into four (4) independently controlled fuse protected outputs. These power outputs can be converted to dry form C contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM4E will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs.

Features

• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the four (4) outputs.
  Fire Alarm disconnect input options:
  • a) Normally open (NO) or normally closed (NC) dry contact input.
  • b) Polarity reversal input from FACP signaling circuit.
• FACP output relay (form "C" contact rated @ 1A 28VDC not evaluated by UL).
• Removable terminal blocks facilitate ease of installation.

AL1024ULX is a power supply/charger that converts a 115VAC, 60Hz input into a single 24VDC non-power limited output.

Input

• Input 115VAC, 60Hz, 4.2A.
• Input fuse rated @ 3.5A/250V.

Includes

• CA250B ACU board
• 1-OCB8 relay board
• 1-DPS-15 power supply
• 1-black metal enclosure with lock and tamper switch

• Includes switchable green, red and blue ADA lenses
• Red LED on plate where applicable
• 5 Amp rated contacts
• Stainless Steel single gang plate: 4.5 x 2.75 in. [114mm x 70mm]y

The DS150i Series consists of the DS150i Detector (light gray) and the DS151i Detector (black). They are specifically designed for Request-to-exit (REX) applications. The DS150i and DS151i detect motion in their coverage area and signal an access control system or door control device.

Features

• Single or double door use
• Wall or ceiling mountable
• Internal vertical pointability
• Wrap-around coverage pattern
• Selectable relay trigger mode
• Selectable fail safe/fail secure modes

Features

• When ordering ZK readers, be sure to specify which card reader technology and cards you need PRIOR to placing your order
• Since customers sometimes are already using existing non-ZK card readers and cards, ZK also provides 125 KHz key fobs which can be clipped on to cards having a badge clip slot
• For customers having non-ZK cards with no badge clip slot, we also offer 125 KHz self-adhesive RFID discs which can be easily adhered