• 1,100 Users over 2 Outputs. Codes may be 4~8 digits: - Output #1  Form C relay, 1A@30VDC, 1,000 users - Output #2  Form C relay, 1A@30VDC, 100 users
• Outputs can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
• Super user code gives admin access to keypad
• Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
• Programmable egress input with optional warning alarm and delayed egress
• Real-time clock to auto-disable access at specific times
• Up to 50 (01~50) duress codes for output #1 and 10 (01~10) for output #2
• Duress code signals a silent alarm if an authorized user is forced to open the door under duress
• 12~24 VDC/VAC Auto-adjusting operation
• All features are programmed directly from the keypad: No need for an external programmer
• IP66 Weatherproof Rating
• Mounts to a standard single-gang back box (surface-mount back box included)
• Durable and attractive stainless steel faceplate
• Tamper output: N.C. Dry contact, 50mA@24VDC max.
• Keypad illuminates when a button is pressed; backlight can be programmed for FULL, AUTO, or OFF in standby mode
• Mantrap: for a protected area with two doors, this feature allows only one door to be open at a time
• Door sensor input for anti-tailgating operation
• Door-propped-open warning
• Door-forced-open warning
• EEPROM Memory protects programmed information in case of power loss

• Simplest and most economical solution for power transfer
• 18 inch cord is standard with Touch Sense Bar and Touch Sense Handle but may also be purchased separately
• Consists of an 18 inch [460mm] or 36 inch [920mm] armored stainless steel cable and plastic end pieces in light gray and black
• Cable has an interior diameter of .25 inch [6mm]
• Supports interior wire cables up to .2 inch [5mm] thick

• Integrated door control, proximity reader and keypad
• 2000 users
• 2000 event audit trail
• 32 doors per site (when managed with Hub Manager® Professional)
• Bi-color LED to indicate operation
• Weather resistant design
• Fits over a single gang electrical box
• Communication via – SEG-1 (LAN/WAN) or USB to 485 converter
• Remote proximity reader mounting and glass mount option

DITEK's DTK-4LCLPCR provides surge protection for card readers operating on 12/24V power. Protects four pairs of power/data connections.

• Protects power, LED and data lines
• Single point ground for all protected circuits
• Series connection, parallel function adds no resistance to loop circuits

• Offers proximity card technology with photo identification capability on a single access control card
• Graphics quality surface for use with direct image printers
• Same size and thickness as a standard credit card
• Vertical or horizontal slot punch capability
• Lifetime warranty

• Single or double door use
• Wall or ceiling mountable
• Internal vertical pointability
• Wrap-around coverage pattern
• Selectable relay trigger mode