S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
10 AMP 120VAC REMOTE CHARGER POWER SUPPLY W/ METAL ENCLOSURE
This item has been discontinued and replaced by item
HPF-PS10
The PS Series is a remote power supply line from Silent Knight and is a direct replacement
for the 5495/5499. The SK-PS6 is a 6 amp and the SK-PS10 is a 10 amp, remote power
supply with battery charger that may be connected to any 12 or 24 volt fire alarm control
panel (FACP) or used as a standalone power supply. The PS Series provides 24 VDC power
for NACs (notification appliance circuits) configured as either Class B or Class A (requires
the ZNAC-PS option card) with multiple sync protocol options. The PS Series also provides
auxiliary power, constant or resettable, suited for detectors, annunciators, door holders, and
other fire alarm system peripherals. The PS Series cabinet can hold two 7 AH or 18 AH
batteries and can charge up to 33 AH batteries in a separate cabinet.
Item#:
SK-PS10
You must be logged in to order this item.
Log in here
- 120/240 VAC 50-60 Hz input
- 5.1 Amps @ 120 VAC or 2.5 Amps @ 240 VAC
- Battery Standby Current 75 mA
- Alarm Standby Current 75 mA (no external load)
- Terminals support 12 - 18 AWG wire
Item#:
PSN-106
You must be logged in to order this item.
Log in here
- Programmable LCD display interface.
- EOL resistor value is programmable by output.
- Ethernet port interface for remote programmability and monitoring.
- 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
- Sync protocols include Potter, Gentex®, System Sensor® , and CooperWheelock®.
- Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
- Compatible with 12VDC or 24VDC fire panels.
- Output loop supervision directed to input 1 or input 2.
- Common trouble Dry N.C. output for reporting trouble to remote FACP.
- Ground fault detection - Ground fault maximum test impedance 1,000 ohm.
- Ground fault Dry N.O. output to report ground fault to remote FACP.
- CO Temporal Code 4 (NFPA720) include Gentex® , Potter and System Sensor® devices
Item#:
FIRESWITCH108
You must be logged in to order this item.
Log in here
ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.
- Rechargeable
- All virgin materials for long life
- More lead for greater Ah capacity
- Size comparable to other manufacturer's lower Ah sizes
- UL Recognized Component
- Nominal Voltage: 12 Volts
- Rated Capacity: 12 AH (20 hour rate)
- Length: 5.94" (151mm)
- Width: 3.90" (99mm)
- Height: 3.78" (96mm)
- Total Height: 3.94" (100mm)
- Terminals: F1-Faston Tab No. 187
Item#:
12120
You must be logged in to order this item.
Log in here
ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.
- Rechargeable
- All virgin materials for long life
- More lead for greater Ah capacity
- Size comparable to other manufacturer's lower Ah sizes
- UL Recognized Component
- Nominal Voltage: 12 Volts
- Rated Capacity: 5 AH (20 hour rate)
- Length: 3.54" (90mm)
- Width: 2.76" (70mm)
- Height: 3.98" (101mm)
- Total Height: 4.17" (106mm)
- Terminals: F1-Faston Tab No. 187
Item#:
1250
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)