|◀ ◀ 181 - 192 of 204 ▶ ▶|
View:

W Panel Input/Output Board

Item#:
WIO100
 
Spec Sheet
You must be logged in to order this item. Log in here

Control Module

Item#:
SW-100
You must be logged in to order this item. Log in here

Commercial Burglary Alarm Control Panel (UL Listed)

The VISTA-128BPT is a powerful member of the Honeywell family of commercial alarm panels, integrating burglary, CCTV and access control functions. Many features are available that extend the applications of the VISTA-128BPT while simplifying end-user operation.
The VISTA-128BPT and VISTA-128BPTSIA are listed for residential burglary, residential fire and commercial burglary applications (see agency listings in this document for more details). They are compatible with a wide range of AlarmNet communications products for alarm reporting, uploading /downloading and remote services.
  • Provides nine style-B hardwired zones
  • Supports up to 119 additional zones using a built-in polling (V-Plex®, multiplex) loop interface
  • Supports up to 127 wireless zones using up to two 5800 series wireless receivers (fewer if using hardwire and/or polling loop zones)
  • Provides one power-limited bell circuit delivering 1.7Amp (max) at 12VDC
  • Provides the ability to control eight separate partitions independently, each functioning as if it had its own separate control
  • Accommodates 150 user codes with seven authority levels
  • Accommodates 32 keypad macro commands per system
  • Keeps a log of up to 512 events
  • Supports up to 16 compatible two-wire smoke detectors on zone 1
  • Zone 7 may be used for keyswitch arming/disarming
  • Integrates with WIN-PAK access control systems to provide increased users, event log and scheduling
  • Supports V-Plex addressable VISTAKEY access control (up to eight doors and 250 cards)
  • Easily programmed and maintained by Compass Windows-based downloader
  • Supports up to 96 programmable outputs
  • Programmable to meet SIA false alarm prevention specifications. To meet UL approval for ANSI/SIA CP-01-2010, order part number V128BPTSIA
  • Supports up to six touchscreen Advanced User Interface (AUI) devices (6272 or later)
  • Smoke detector reset at keypad
  • Quick exit
  • Group bypass
  • Arm faulted
  • Event arming
  • Carbon monoxide (CO) zone type support
  • Expanded high-speed RS-232 capability for third party interface and automation
  • Internet upload/download over AlarmNet GSM and/or IP communicators over the panel's keypad (ECP) bus
  • Ringback support for AlarmNet communicators (confirmation of closing report)
  • 24-hour dialer test support for AlarmNet devices
  • Supports V-Plex Smart Contact feature for improved responsiveness on systems with many V-Plex zones
  • Telco line cut detection
Item#:
VISTA-128BPT
 
Spec Sheet
You must be logged in to order this item. Log in here

6 Zone Control Panel with Keypad, Wireless Ready

Item#:
XP-400/4
You must be logged in to order this item. Log in here

Takeover Kit - Hardwire Conversion Kit for GC2

Are you looking to upgrade an existing wired security system to a wireless one? Whether you are replacing an older, wired security system or want to retrofit the pre-wired security sensors common to new construction, the 2GIG Hardwire Conversion Kit is the ideal solution and is easy to install. Leveraging 2GIGs patented wireless takeover technology, each kit includes one (1) Super Switch Takeover Module which converts up to eight (8) wired sensors to 2GIG wireless zones. The kit also includes a Power Supply Board with backup battery charging circuit, a Grounded Plug-in Transformer, and an ABS plastic enclosure that includes a dedicated space for your backup battery (battery not included).

The enclosure also houses up to two (2) additional Super Switch Takeover Modules, which increases your capacity to convert up to 24 wired sensors to wireless zones.

Kit contents

  • ABS Plastic Enclosure (UL 94: V-0)
  • 2GIG Super Switch Takeover Module (2GIG-TAKE-345)
  • 12/24 VDC Power Supply Board
  • 16.5 VAC 50 VA Grounded Plug-in Transformer
  • Mounting Hardware


Features
  • 2GIG Super Switch Takeover Module which uses the patented technology for Wireless Takeover of an Alarm System (US Patent No. 8,638,218)
  • Power Supply Board with a battery backup charging unit
  • Grounded plug-in transformer with LED indicator for power supervision
  • ABS Plastic wall-mounted enclosure meets UL 94: V-0 Flammability Standards


Requirements
  • 2GIG GC2 Panel Wireless Security System
  • 12V, 1.4 AH Rechargeable Sealed Lead Acid Battery (or better)


Add-On Components
  • Backup Battery (required). One (1) 12 V, 1.4 AH Rechargeable Sealed Lead Acid Battery (or better) is required
  • 2GIG-TAKE-345: Super Switch Takeover Module (optional). Add up to two (2) additional modules in the enclosure
  • Linear H208: Lock Kit (optional). Recommended for locking the plastic wall-mount enclosure with a key for additional security

Item#:
2GIG-TAKE-KIT1
 
Spec Sheet
You must be logged in to order this item. Log in here

Commercial/Residential Panel with Ethernet/IP and 3G Cellular Modem

The Cell+Ethernet W Panel is designed for securing residential and small commercial properties. Modular expansion allows for:

  • Wi-Fi communication to customer router (see WWB100 Wi-Fi Board)
  • Inputs and outputs for upgrades to existing burglar alarm systems and integration with third-party devices (see WIO100 Input/Output Board)
  • A wired indoor siren (WIS100 Wired Siren) that can be attached to the panel or detached

Item#:
WIP630
 
Spec Sheet
You must be logged in to order this item. Log in here

GEM-P816 control panel, GEM-RP1CAE2 Keypad, & Transformer

GEM-P816 control, GEMRP1CAE2 alpha keypad & transformer GEM-P816 Features:

  • 8 Hybrid zones on-board (hardwire or wireless), including 2 2-wire fire zones
  • Up to 16 EOL zones with multiplexing (zones from RP1CAe2 alpha keypads or multiplex expansion modules)
  • Uses low-cost GEM-EZM4/8 or 8-zone GEM-EZM8 expansion modules
  • Up to 16 users
  • Supports choice of up to 7 Gemini keypads
  • 256 event logging
  • 3 outputs
  • Interior bypass group
  • Choice of Gemini RF receivers
  • Event log with open/close suppression
  • Supports GEM-EVA Voice Annunciator and WizardIIe Talking Phone-In Interface Module
  • Includes transformer

    • GEM-RP1CAE2 Features:
    • Deluxe 32-character backlit, menu-driven, dual-line display
    • Custom alphanumeric zone directory
    • Built-in 4 Zone expansion module
    • Display of wireless transmitter signal strength 1-10
    • EZ Keypad Programming2 with actual Q&A's
    • Traditional interior and instant keys with the GEMRP1CAe2
    • Large soft touch backlit keys with tone
    • Backlit displays for easy reading
    • Wireless transmitter signal strength indication
    • Fire, police and auxiliary programmable panic keys
    • Fingertip reference chart

Item#:
816PREMPAK
 
Spec Sheet
You must be logged in to order this item. Log in here

Wi-Fi Board

Item#:
WWB100
You must be logged in to order this item. Log in here

Universal 2-Way LCD Keyfob & Receiver

Features:

  • Bidirectional keyfob with LCD status icon display and sounder.
  • System Status is indicated on its LCD display with 8 intuitive icons (a lock, a house, a flame, etc.) plus corresponding audible beeps
  • Universal panel compatibility with most major control panel brands, using bus or keyswitch input (including bus operation on NAPCO's Gemini & Magnum plus Honeywell)
  • Complete kit with dedicated 2-way Keyfob Receiver and one fob in 2WAY-UNIVKFKIT; or add on up to 6 more fobs, sold separately 2WAY-UNIVKF
2WAY-UNIVKF Features:
  • The security industry's first and only universal bi-directional keyfob with LCD status display and integral mini sounder, supported by a revolutionary dedicated keyfob receiver.
  • Designed to be compatible with most major control panel brands, including NAPCO's Gemini and Magnum, and others such as ADEMCO, DSC, ITI and more, this 2-way keyfob is super-miniaturized for portability yet packs tremendous consumer appeal and sales potential.
  • System status is indicated with 8 intuitive icons (a lock, a house, a flame, etc.) on the LCD display, and corresponding beep sequences on its mini sounder. Providing both easily understood visual and audible feedback, the user always knows with certainty that the system has carried out their command.
  • In addition to the many standard commands it can send to the system, it can also control up to 2 groups of lighting control, such as X-10, and up to 2 separate garage doors.
Item#:
2-WAY-UNIVKFKIT
 
Spec Sheet
You must be logged in to order this item. Log in here

XANBOO HONEYWELL ALARM MODULE FOR INTERFACE TO GATWAY

Item#:
XANXCB80H
You must be logged in to order this item. Log in here

Universal 2-Way LCD Keyfob

  • Bidirectional keyfob with LCD status icon display and sounder.
  • System Status is indicated on its LCD display with 8 intuitive icons (a lock, a house, a flame, etc.) plus corresponding audible beeps
  • Universal panel compatibility with most major control panel brands, using bus or keyswitch input (including bus operation on NAPCO's Gemini & Magnum plus Honeywell)
  • Complete kit with dedicated 2-way Keyfob Receiver and one fob in 2WAY-UNIVKFKIT; or add on up to 6 more fobs, sold separately 2WAY-UNIVKF
Item#:
2-WAY-UNIVKF
 
Spec Sheet
You must be logged in to order this item. Log in here

GEM-P801 Control Panel Kit

GEM-P801.GEM-RP8LCD STAY/AWAY LCD CUSTOM ALPHA KEYPAD, TRANSFORMER, WALL MOUNT SIREN, PIR1680PT, 12V 4AH BATT, RJ31 J&C

Item#:
801LCD-SUPERSVR
You must be logged in to order this item. Log in here
|◀ ◀ 181 - 192 of 204 ▶ ▶|
View:
(Denotes required field.)