The Alpha Communications EPS155 Emergency Station may be used in any location where activation of an emergency signal is required. All electronic components are mounted on a circuit board. The EPS155 features a built-in Red (flashing) LED, and 6 foot nylon pull cord.

Due to the flexibility of its design, it may be used as a PULL CORD EMERGENCY STATION, OR a PUSH TYPE EMERGENCY STATION. The pull cord supplied may be used for emergency call activation or if so desired, the LARGE RED push/pull down lever may be used.

The EPS155 is used primarily with the AlphaLinQ 100 series visual nurse-call system, but can be used and is backwards compatible with some older systems as well. The EPS155 is U.L. 1069 listed, to the latest standards.

Features

• U.L. Listed 1069 - to the latest standards
• Simple and flexible operation.
• RED L.E.D. "Called Placed" indicator (flashing)
• Call cancel only at point of origin.
• Flame Retardant type ABS White Plastic Faceplate
• Can be used as a Pull or Push type station
• Corridor Zone Light Capability (optional)

• 5J Xenon beacon
• Quarter turn fasteners for ease of installation
• 113dB at 1 meter/103dB at 10ft. (max); 105dB at 1 meter/95dB at 10ft. (typical)
• Volume control for greater flexibility - 20dB
• 64 tones
• Separate connections for sounder and beacon
• IP66 rated
• Operating temperature range: -13ºF to 131ºF (-25ºC to 55ºC)

• LED light source
• Compact, ultra modern sleek appearance
• IP65 rated; IP67 rated (with upgrade kit)
• White, high quality polycarbonate housing
• Suitable for use in indoor and outdoor applications
• Vandal-resistant safety locking mechanism
• Operating temperature range: -4°F to 158°F (-20°C to +70°C)

• SBUS addressable
• 50 watts of supervised audio power
• One Class A or Class B speaker circuit
• 25 volt or 70.7 volt operation
• UL 864 and UL 2572
• Easy to install assembly in the 5820XL-EVS cabinet
• Six-wire connection to the EVS system:
  • Two-wires for the Voice BUS
  • Two-wires for the SBUS
  • Two-wires for the 24 VDC power source from an I/O circuit on the 5820XL-EVS programmed for constant auxiliary power
• UL listed for 520Hz signaling when used with compatible System Sensor speakers. See 5820XL-EVS installation manual LS10061-001SK-E for list of compatible speakers

• 5J Xenon or high efficiency LED
• Three alarm stages
• Quarter turn fasteners for ease of installation
• Low in-rush current (LED only)
• Static/flashing mode (LED only)
• 113dB at 1 meter/103dB at 10ft. (max); 105dB at 1 meter/95dB at 10ft. (typical)
• Volume control for greater flexibility - 20dB
• 64 tones
• Separate connections for sounder and beacon
• IP66 rated
• EN54-3 Type B compliant
• Operating temperature range: -13ºF to 158ºF (-25ºC to 70ºC)

• 5J Xenon beacon
• Quarter turn fasteners for ease of installation
• 113dB at 1 meter/103dB at 10ft. (max); 105dB at 1 meter/95dB at 10ft. (typical)
• Volume control for greater flexibility - 20dB
• 64 tones
• Separate connections for sounder and beacon
• IP66 rated
• Operating temperature range: -13ºF to 131ºF (-25ºC to 55ºC)

• Xenon strobe light source
• Flame retardent polycarbonate construction
• Red base
• IP65 rated
• Single/double flash (DC version)
• Operating temperature range: -13ºF to 131ºF (-25ºC to 55ºC)