The SD500-ARM is an addressable device that adds great flexibility to the IntelliKnight system. Providing two Form C contacts rated at 2.0 amps @ 30 VDC or .6 amp @ 120 VAC. The SD500-ARM allows you to control a wide variety of normally open and normally closed applications, including elevator recall, door closing, fan operation, and auxiliary notification. And, because the relay module is addressable, these applications can be located at any point in the signaling line circuit.

The CMF-300 Addressable Control Module provides FireLite intelligent control panels a circuit for Notification Appliances (horns, strobes, etc.). Addressability allows the CMF-300 to be activated through panel programming, on a select (zone or area of coverage) basis. LiteSpeed is a communication protocol developed by FireLite Engineering that greatly enhances the speed of communication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs.

Features

• Built-in type identification automatically identifies these devices to the control panel.
• Internal circuitry powered directly by two-wire SLC loop. The CMF-300 module requires power (for horns, strobes, etc.).
• Integral LED blinks green each time a communication is received from the control panel and turns on steady red when activated.
• High noise immunity (EMF/RFI).
• The CMF-300 may be used to switch 24-volt NAC power.
• Wide viewing angle of LED.
• SEMS screws with clamping plates for wiring ease.
• Direct-dial entry of address: 01 159 for MS-9600 series panels, 01  99 on MS-9200UDLS and MS-9050UD.

MS-10UD-7 is a ten zone conventional fire control panel has features normally found in more expensive addressable systems. The MS-10UD-7 is fully programmable via built-in keypad and 80 character LCD display, so you do not need an external programmer. The ten zones panel has a built-in Digital Alarm Communicator Transmitter (DACT) and availability to add optional equipment: Remote annunciator, Relay module, LED Driver module, Transmitter module and Printer interface module.

Features

• Ten-zone Style B (Class B) or Five-zone Style D (Class A) with optional module
• Four NAC Circuits Style Y (Class B) or Four NAC Circuits Style Z (Class A) with optional modules
• Built-in NAC synchronization for System Sensor, Wheelock, Gentex, Faraday and Amseco devices
• Built in programmer: Integral 80 character LCD display with backlighting and keypad
• Annunciator bus supports up to 8 devices, including ANN-80 LCD Remote Annunciator, ANN-S/PG remote serial or parallel printer gateway, ANN-RLY, 10 form C relay board, ANN-LED Zone annunciator and ANN-I/O LED driver board for graphic annunciators
• Built-in two-line digital communicator for off premises monitoring
• Three Form-C programmable relays
• 7.0 amps total usable current

The CRF-300 Addressable Relay Module provides the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, door holders, dampers, control equipment, etc. Addressability allows the dry contact to be activated through panel programming, on a select basis. LiteSpeed is a communication protocol developed by FireLite Engineering that greatly enhances the speed of communication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs.

Features

• Built-in type identification automatically identifies these devices to the control panel.
• Internal circuitry and relay powered directly by two-wire SLC loop.
• Integral LED blinks green each time a communication is received from the control panel and turns on in steady red when activated.
• High noise immunity (EMF/RFI).
• Wide viewing angle of LED.
• SEMS screws with clamping plates for wiring ease.
• Direct-dial entry of address: 01 159 for MS-9600(A) series

Fire-Lites CRF-300-6 six-relay control module provides an intelligent alarm system with six Form-C relays. Provisions are included for disabling a maximum of three unused modules.

Features

• Six addressable Form-C relay contacts.
• Removable plug-in terminal blocks.
• Status indicators for each point.
• Unused addresses may be disabled.
• Rotary address switches.
• Mount one or two modules in a BB-X2F cabinet (optional).
• Mount up to six modules on a CHS-6 chassis in a BB-2F cabinet (optional).

The SD500-AIM is an addressable input module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations. The SD500-AIM mounts to a 4 in. square box.

Features

• Single contact monitor
• Support for Class B or Class A wiring
• Attractive ivory cover plate
• DIP switch programming for fast installation
• UL listed

Addressable Mini-Monitor Module, One Style B (Class B) Initiating Device Circuit for Monitoring N/O contact devices, does not include a polling LED

The MMF-301 monitor module can be installed in a single gang junction box directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mounting. The MMF-301 is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary switches. It provides a two-wire initiating circuit for normally open contact fire alarm and security devices. This module can be used to replace an M301 module in existing systems.

The SK-MONITOR is an addressable monitor module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations.

Features

• Single contact monitor
• Rotary address switches for fast installation
• Support for Class B or Class A wiring
• Bright white cover plate
• SEMS screws for easy wiring
• UL listed

Fire Alarm Control Panel, 4-Zone, Class B/A (Use CAC-4 for ClassA), 24VDC, 1 Classs B/A (Use CAC-4 for Class A) NAC

MS-4 is a four zone conventional fire alarm control panel compatible with the new I3 smoke detectors from System Sensor, and provides such advanced features as drift compensation, maintenance alert, and freeze warning. Automatic synchronization of audio/visual devices is provided, using manufacturer protocol for System Sensor, Wheelock and Gentex appliances. The NAC protocol includes the ability to silence audible devices while strobes continue to flash, using only a single pair of wires.

Features

• Four initiating zones compatible with 2- and 4-wire smoke detectors, one zone programmable for combo, supervisory and waterflow
• Two NACs with built-in horn/strobe synchronization for System Sensor, Wheelock or Gentex with selectable silence Optional module to convert all four initiating zones and two NACs to Class A
• Compatible with System Sensors smoke detectors, providing EZ Walk Test and a Remote Maintenance Signal (panel is offered as i3 Ready, no additional modules needed)
• 3.0 amps total usable current and expandable to 6.0 amps total with optional second transformer
• Options include a plug-in 4XTMF transmitter module, a 4XLMF module to support LED annunciators and a plug-in 4XZMF zone relay module

The SK-MINIMON is an addressable mini-monitor module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations. Due to its small size the SK-MINIMON can be mounted in a single gang junction box directly behind the monitored device.

Features

• Single contact monitor
• Support for Class B (Style B) contact monitor wiring
• Small and lightweight size allows for flexible mounting options
• Rotary address switches for fast installation
• UL listed