|◀ 1 - 12 of 962 ▶|
View:
You must be logged in to order this item. Log in here
Extend security and awareness outside the home or business with Alarm.com’s Connected Car offering. Track your vehicle‘s location, view engine status, and analyze fuel efficiency—right from the Alarm.com Mobile App.

Ā FEATURES
• 4G LTE
• GPS for location tracking
• Accelerometer for
movement detection
• Backup battery
• Works with the Alarm.com
Mobile App
Item#:
ADC-3035L-AT
You must be logged in to order this item. Log in here
Item#:
GRIPAC-2-B-1.5
You must be logged in to order this item. Log in here
16 Zone hardwire to wireless translator with 319.5 MHz S-Line Encryption.Ā  Supports 2-Wire smoke detectors.Ā  Certified for Residential Fire.Ā  Installed in "Takeover" style enclosure.Ā  Built-In Power Supply, backup battery charging, and Relay for External Sirens or Speakers.Ā  Includes transformer.Ā 

The IQ Hardwire 16-F offers a cost effective way of integrating hardwired security & smoke detector zones with the IQ Panel 2/2+. It includes backup battery charging, 500mA of 12volt auxiliary power, an onboard siren relay, built-in status LED's for each zone and support for up to 10 two-wire smoke detectors. Normally Open and Normally Closed contacts are supported as well as powered zones like motion sensors and glass break detectors.
  • Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
  • Supports up to ten two wire smoke detectors
  • LED lighted zones for ease of "learn-in" installation/troubleshooting
  • EOL supervision using 4.7K Ohm resistors (included)
  • Up to 500 Milliamps of power for hardwired motion detectors, glass break detector, and/or sirens
  • Charging circuit for back-up battery, fully supervised with power outage recovery
Item#:
QS7133-840
You must be logged in to order this item. Log in here
Large properties demand multiple points of interaction with the system, which can push the limits of wireless range. Extend your reach with the Touchpad Range Extender, ensuring access is available, wherever it's needed.
  • Wireless Range Extension
  • Single Button Enrollment
  • 5-year warranty
Item#:
RE621
You must be logged in to order this item. Log in here
The Flex IO enables new levels of flexibility for monitoring valuable
property and assets anywhere that LTE connectivity is available.
Features
• Detect open/close using magnetic
reed switch
• Detect state change for third-party
device using Loop Input
• Change state of third-party and device
using Relay Output (requires DC power to
support always-on cellular connection)
Item#:
ADC-FLEX-100-VZ
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Z-Wave/Translator card placed in Slot 3. Enables both Z-Wave and Translator services to be offered in a Connect+ installation.
  • Expansion Card that plugs into the Connect+ Panel
  • Provides communications with Z-Wave devices enabling a broad range of home automation features
  • Enables system to receive signals from Honeywell, 2GIG, GE, Napco & DSC sensors
  • All sensor alarm, supervisory and trouble signals are reported
  • Dual antennas for reliable rangeĀ 
Item#:
RE934ZT
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The GEMC-BSLC-RLY "Non-Polarized" Single Point Relay Module is a low-current Form C relay interface accessory. The GEMC-BSLC-RLY provides a dry contact relay output for controlling bells, door latches, lights, strobes and other similar Burglary and Home Automation devices.

The GEMC-BSLC-RLY Relay Module connects onto the SLC Bus (polling loop terminalson the GEMC-BSLC board) along with such other accessories as GEMC-BSLC-1PT and GEMC-BSLC-4PT modules.

The GEMC-BSLC-RLY is easy to install--when wiring to the polling loop, the terminals (4 and 5) are non-polarized and so can be connected to either side of the SLC loop. Up to 88 GEMC-BSLC-RLY units may be used with any one Gemini C-Series control panel. Based on the available current the GEMC-BSLC provides, up to 44 GEMC-BSLC-RLY modules may be used with any one GEMC-BSLC.

The first 40 External Outputs (1-40) of the Gemini C-Series control panels are supervised Form C relay contacts (the position of the relay is supervised, but the external relay output wiring is not supervised for opens or shorts). Due to relay supervision, reporting and disabling options, we recommend these first 40 outputs be reserved for controlling Fire devices. Devices addressed as 41-88 are not supervised (do not have a local or remote trouble indication) and thus are for supplementary use only. For UL installations, the external device must be mounted no greater than 3 feet from the GEMC-BSLC-RLY module with no intervening walls or barriers. Refer to the control panel installation instructions for wiring requirements in UL-listed applications.

Features:

  • Communication and operating power received from the control panel via the addressable polling loop
  • Electronics enclosed within a easy to install plastic case
  • Approved for Commercial Burglary and Residential Burglary installations. Note: For Commercial applications, the GEMC-BSLC-RLY module must be installed within a UL-Listed tamper-protected enclosure (i.e. GEMC-HSKIT12V-R, GEMCHSKIT12V-CF or CI-HSKIT12V UL Listed Enclosure Subassembly with GEMC-TAMPERKIT).
Item#:
GEMC-BSLC-RLY
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 1 - 12 of 962 ▶|
View:
(Denotes required field.)