Home  >  Intrusion  > (x)
|◀ 3301 - 3312 of 3613 ▶|
View:
You must be logged in to order this item. Log in here

Based on Doppler concept, Pet Immunity up to 55 lbs (25 kg), Form A, Quad Linear Imaging Technology.

Item#:
LC-103-PIMSK-W
You must be logged in to order this item. Log in here

Addressable SLC Burg Module, supports up to 128 addressable SLC burg devices. Up to 2 connect to GEM-C panel.

Item#:
GEMC-BSLC
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

40 ft. Wide Angle, Dual Element,up to 16 ft. Ceiling, "Snap In Base", N/O N/C - Selectable, 10.5 to 28VDC

The PA-6800 series ceiling mount indoor PIR sensors combine a discreet compact appearance with outstanding performance at a low price. The sensor can be snapped in and out of the detachable base unit for easy installation in high places.

Features:

  • Super slim and compact design
  • Detachable base unit with snap-in/out sensor design for easy installation
  • Sensitivity/pulse count selectable
  • NO/NC contact output

Item#:
PA-6812
You must be logged in to order this item. Log in here

The DVP-120 exhaust fan controller, in conjunction with Macurco gas transducers, provides automatic controls to help maintain an acceptable environment in parking garages or other facilities  ETL Listed, LADBS Approved.

  • 120-240 VAC input
  • 12 analog (4-20mA)
  • Three 10A SPDT Fan / Alarm Relays
  • Two 24VDC drivers for Horn / Strobe
  • Coverage Area: Up to 60,000 sq. ft.
  • External display show system and sensor status
  • Compatible with Macurco 6-Series and 12-Series detect
Item#:
DVP-120
You must be logged in to order this item. Log in here
Item#:
PREAA1
You must be logged in to order this item. Log in here

The HX-80N is a high mount, outdoor passive infrared detector that provides the stability and reliability necessary for an outdoor PIR sensor. The most important element in reliable outdoor detector is accuracy to distinguish a human from a small animal. The exclusive pyro element on board enables the HX to project an ideal detection pattern, thus allowing for more accurate detection of humans and less false alarms. In addition, the HX-80N's dual PIR's and 20 detection zones utilize the 'AND' detection pattern technology - upper and lower detection areas have to be activated in order to generate an alarm condition. This technology helps to prevent false alarms caused by a pet or small animal. The HX Series' detection length can be limited to avoid unwanted detection, and it's short range zones can be masked if needed. By limiting the detection range, false alarms due to unwanted movement (cars, persons or animals outside the protected area) can be eliminated.

Features:

  • Mounting height 8ft. - 10ft.
  • Intelligent and detectionlogic
  • Double conductive shielding
  • Advanced temperature compensation logic
  • Summer night compensation logic
  • Vegetation sway analysis logic

Optex Wireless Intruder Warning Solutions from John Marco on Vimeo.

Item#:
HX-80N
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 3301 - 3312 of 3613 ▶|
View:
(Denotes required field.)