S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsMotion sensor with built-in still camera with higher resolution, wider field of view (requires IQ Card QC0003-840)
The Image Sensor is a motion sensor with a built-in still camera that can be placed anywhere in the home for easy, wireless, affordable surveillance. If the alarm is triggered the Image Sensor will automatically take pictures and send them to the panel and mobile device. You can also manually "peek-in" either right now or the next time the Image Sensor detects motion and a photo will be sent automatically to the mobile phone via text or email.
The DSC ADP1310W-NAU is a power adapter that can be used with the 3G4000USA, LE4000E-AT, GS3060, and 3G3070 cellular radios. Most of these radios can be powered off of the alarm system itself, but if you're drawing quite a bit of power from the panel already then this adapter will provide the cellular radio with its own independent power source.
The adapter measures 4" (H) x 2.375" (W) x 2" (D) in size and provides 13.8 VDC / 1A of power for the DSC cellular communicators. It is rated to be used on 100-240VAC power systems that are rated at 50/60Hz.
- Built-in reed switch and piezo shock sensor
- Adjustable sensitivity and range of shock sensor
- Long range and battery life
- Transmits open/close, tamper, low battery, and supervisory signals
- Uses easy to find CR2032 batteries
- RF frequency: 319.5 MHz
- Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
- Battery type: Two (2) CR2032 3VDC lithium coin-cell
- Operating Temp Range: 32 to 120°F (0 to 49°C)
- Dimensions: 2.25" L x .1.0 x 0.50" in. (L x W x D)
Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.
Features
- 8 on-board zones
- Expandable to 32 hardwired zones
- Expandable to 32 wireless zones
- 2 PGM outputs: expandable to 14 (PC5204, PC5208)
- Connect up to 8 supervised keypads
- Template programming
- 4 partitions
- 500-event buffer
- 72 user codes
- CP-01 compliant
- Supports wire free keypads with TR5164-433 transceiver
- Compatible with leading edge interactive services supported by DSC
Includes: 7" All In One Touchscreen, 8 Core Processor, LTE & WiFi Dual Path, Live View & Live Answer, Improved Speaker Volume, Z-Wave Plus (500 Series), Easy install backplate/table stand, End user replaceable battery, Lower Cost |