S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The PG9949 Wireless PowerG 2-Button Key combines easy management of the security system with the added confidence of personal portable protection. The modern, compact key lets users easily arm/disarm the system as they approach the building or call for help in the event of a danger when in close proximity to or inside the building.
The PG9949 Wireless PowerG 2-Button Key provides both visual and audible verification of the successful execution of any requested commands. The dual confirmation that the message has been executed by the security system offers peace of mind to users.
The PG9949 is equipped with a full two-second activation delay on its panic function to help reduce false alarms, thus minimizing costly false dispatches caused by accidental activations. Additionally, the other keys incorporate a one-second delay to minimize false activations.
Features:
- Activation via 2 large, easy to use buttons
- Integrated LED to indicate signal transmission and acknowledgement
- Built-in buzzer for audible indication
- Water resistant
- Multifunction clip and neck strap
- Full 2-second delay on panic button
- Safety Mechanism for preventing false panic calls
- Prolonged battery life (7 years with typical use)
- Supplied with a belt clip, a key chain, and a lanyard necklace
- Dimensions: 53 x 33 x 11mm (2.1 x 1.3 x 0.43in)
- For sensing things that open or separate
- Magnet and Internal reed switch
- 1 supplemental hardwire zone
- Outer terminal
- Cover tamper
- Strong, reliable RF signal
- 10-15 year battery life on CR123A battery
- Low Battery indication
- Secure, 4-10-digit code to disarm
- 1-button arming
- Mounts on wall via VHB tape
- Option to use as primary or backup-keypad device
- LED indicator
- Reversible backplate for wall or table top mounting
The EV-DW4917 is designed to provide installers with flexibility during difficult installations. By having access caps flanged or nonflanged, installers are able to decide whether its necessary to screwmount or press-fit an installation. Another feature of this installer friendly device is its replaceable lithium battery that provides uninterrupted supervised security for many years.
Barely discernable once installed, the EV-DW4917 is completely hidden when the door is closed. This is ideal for those customers who do not want to compromise the aesthetics of their décor.
Features:
| »
1080P HD video » Two way audio » Motion detection » 2.4GHz Wi-Fi » 101° field of view » 90 foot night vision » IP66 weatherproof » 2MP image sensor |
To enroll the DWS-LL, begin by placing the panel into wireless enrollment mode and then sending an enrollment signal from the LongLife sensor. Alternatively, the LongLife sensor can be enrolled by scanning its bar code using the Alula app or by entering its 8-character serial number on the interactive GeoArm web portal.
To install the DWS-LL, begin by removing the adhesive paper and adhering the LongLife contact and magnet on a door or window. Clean the surface of where you plan on mounting it. Leave a minimum of 3/16 inch clearance around the ends of the sensor to allow the cover to open. Make sure to align the alignment marks on the LongLife and magnet when mounting. Alternatively, LongLife can be used with an external contact instead of the reed switch.
The High Bond Tape (3M VHB Tape) works great if the surface is properly prepared and firm pressure is applied for over 10 seconds. The LongLife wireless performance is optimized when mounted near the top of the door in a vertical orientation.
- Low-profile design
- Easy, slide-open cover
- Battery pull-tab enrollment
- 5-year product warranty
- 10-year battery life (replaceable)
The M1XRFTWM two-way wireless transceivers allow an ELK-M1 or ELK-M1EZ8 control to accept Elk's complete line of two-way wireless sensors. The ELK-M1XRFTWM has been optimized to provide superior signal reception and reliability in multi-transceiver applications.
The ELK-M1XRFTW has been replaced by the ELK-M1XRFTWM. The ELK-M1XRFTWM performs all the functions of the ELK-M1XRFTW and is suitable for single or multiple transceiver installations.
DO NOT mix ELK-M1XRFTW and ELK-M1XRFTWM transceivers in a single M1 installation.
Includes:
- Two Way Wireless Transceiver
- Plastic Housing
- (4) #6 Plastic Anchors
- (4) # 6 Pan Head Sheet Metal Screws
- Instructions
- Allows up to 144 individual wireless zones (sensors/points)
- Operates from the 4 wire RS-485 Data Bus
- Up to 4 M1XRFTWM transceivers may be connected to a single M1 or M1EZ8 control for redundancy and greater coverage
- Flash memory for firmware updates
- Operating Frequency: 902 Mhz to 928 Mhz
- Sensitivity: >105 dbm
- Operating Temperature: 0 to +120 degrees F
- Operating Voltage: 12 Volts D.C.
- Current Draw: 25mA receiving, 85mA transmitting
- Housing Dimensions: 6.75 in. x 4.69 in. x 1.13 in.
S2K Administration - Form Template Display
Actions