Home  >  Intrusion  > (x)
|◀ ◀ 241 - 252 of 3613 ▶ ▶|
View:

PowerSeries 32 Zone 433MHz Wireless Receiver Module

Features:

  • Supports 32 wireless zones, 16 wireless keys
  • All wireless detectors are fully supervised for communication integrity
  • Compatible with PC1616, PC1832 and PC1864 control panel
  • RF5132-433 is compatible with PC585, PC1616, PC1832 and PC1864 control panels

Item#:
RF5132-433
 
Installation Manual
You must be logged in to order this item. Log in here

RECESSED PB CONTACT,BROWN 12" LEADS

Item#:
GRIPBF100B
You must be logged in to order this item. Log in here

Metal Key - Only to PADP2SS/UL

Item#:
KEYPAM
You must be logged in to order this item. Log in here

M1 LCD Low Profile Keypad

The ELK-M1KP2 is a low profile, addressable LCD Keypad for the M1 family of Cross Platform Controls®. It features a 32 character blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with the ELK menu navigation keys. It may also be recess 'flush' mounted using with a separately purchased back box kit (ELK-M1BBK2). The M1KP2 is compatible with "external" 26 bit Wiegand compatible proximity readers, allowing cards or fobs to be used for arming, disarming, or limited door strike control, etc.
Includes:

  • Low Profile LCD Keypad with Blue Display
  • 1 each Multicolor Labels
  • 4 #6 Flat Head Phillips Sheet Metal Screw
  • 4 #4-20 Pan Head Phillips Plastite Screw
  • 1 2200 Ohm Resistor
  • 5 Gel Filled B-Connector
  • 1 Mini Jumper
  • 6-wire Flying Lead Cable Assembly
  • Instructions
Features:
  • Blue/white Backlighted Hi-Contrast LCD Display
  • Four (4) Programmable Function Keys
  • Unique Menu Navigation/Direction Keys
  • Operates from the M1/EZ8 RS-485 Data Bus
  • Built-in Piezo Sounder with adjustable pitch
  • Accepts "External" 26 bit Wiegand Prox Reader (Optional)
  • Input for 1 Supervised Zone
  • One Programmable "Switched Positive" Voltage Output
  • Exit, Stay, Chime, and Bypass Keys
  • Surface mounts to a standard 1 or 2 gang electrical box
  • Optional recess 'flush' mount kit available (ELK-M1BBK2)
Specifications:
  • Connection: 6 Pin Plug-in "Flying Lead" Connector (Included)
  • Color: White
  • Operating Voltage: 13.8 VDC
  • Current Draw: ~30 mA Idle (low back light level, sounder silent) ~85mA Fully Active (max. back light & sounder active)
  • Size: 4.658 in. W x 5.5 in. H x .95 in. D (.375 in. D with recess mount)
Item#:
M1KP2
 
Spec Sheet
You must be logged in to order this item. Log in here

PowerSeries Pro/NEO Full Message LCD Hardwired Keypad with English function Keys, Built-in PowerG Transceiver, and Prox Support

Compatible with HS2016, HS2032, HS2064 and HS21218 control panels.  *Note - Only keypad version 1.4 or higher is compatible with PowerSeries Pro.
Item#:
HS2LCDRFP9ENG N
You must be logged in to order this item. Log in here

NEO ICON Hardwired Keypad with English Function Keys

NEO ICON Hardwired Keypad with English function keys. Compatible with the HS2016, HS2032, HS2064 and HS2128 control panels.

Features

  • Up to 128 hardwired or wireless zones supported
  • Modern, slim-line landscape keypad
  • White backlit keys
  • Blue LCD display
  • 5 programmable function keys
  • Input/Output terminal
  • Fire, medical and panic keys
  • Adjustable backlight and keypad buzzer
  • Available with English function keys
  • Proximity with MPT mini prox tags
Item#:
HS2ICNENG
 
Spec Sheet
You must be logged in to order this item. Log in here

Battery Expansion Kit to triple batterly life

For VXI Series, VXS Series, BXS Series

Item#:
RBB-01
You must be logged in to order this item. Log in here

IQ Mini DW Extended S-Line

The IQ Mini Extended door/window sensor is a powerfully small encrypted device that can be placed on anything that opens or closes. With double batteries up to 8-10 year battery life, a rare earth magnet for more flexibility when installing on tricky moulding or other openings. Create automation rules like "turn on light when door is opened" or "Adjust thermostat if window left open".
  • Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
  • Can be easily mounted on doors or windows with included adhesive
  • Alerts IQ Panel if moved more than 1"
  • Can be programmed as "Safety Sensor" for medicine cabinets, chemical storage, safes or storage closets
  • Using Alarm.com you can get a text if your door or window is left open
  • Create automation rules like "turn on light when door is opened" or "adjust thermostat if window left open"
  • Requires two (2) 3V CR2032 Batteries
  • The built-in tamper switch triggers an alert if the cover is removed
  • Create custom names for each sensor, determine unique chime type, choose voice prompts on or off
  • Sensor: 2.5"H x 1"W x .5"D
  • Wireless signal range: 600ft (200M), open air.
  • Code outputs: tamper, tamper restore, alarm (primary open), alarm restore (primary close), external alarm (secondary wired open), external restore (secondary wired closed), low battery.
  • Transmitter frequency: 319.5 MHz
  • Unique code ID
  • Supervisory keep-alive interval: 70 minutes.
  • RF Peak field strength: typical 36000 uV/m at 3m
  • Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
  • Replace battery with exact replacement every 5 years with 3V CR2032 Lithium (x2).
Item#:
QS1137-840
You must be logged in to order this item. Log in here

High Power Repeater with Transformer

The Inovonics high power repeater with transformer intelligently amplifies transmission from any EchoStream series transmitter while ignoring background noise. The repeater is perfect for large facilities such as multi-floor buildings, multi-building sites, shopping malls, campuses and other open-air installations. Virtually any number of repeaters can be added to a system, scaling the system size as needed.

Features:

  • Includes 120 VAC power transformer
  • Includes backup battery
  • No wires or programming needed
  • Self configuring
  • Case tamper protection
  • UL listed

Item#:
EN5040-T
 
Spec Sheet
You must be logged in to order this item. Log in here

0°C/32°F - For notification of a freeze

Item#:
GRIT8000
You must be logged in to order this item. Log in here

Timer, 365 Day 24 Hour Annual Event, 1 Channel, LCD Display

PT724A is an extremely versatile 24 Hour 365 Day Event Timers designed to support a wide range of applications: Home and Building Automation, Security, Access Control, Lighting Control, Etc.The PT724A are equipped with an independently controlled form "C" relay contact that provides many latching and/or momentary operations during a program schedule of your choice. Events may be set for single or multiple operations on a daily and/or weekly schedule.

Features:

  • EE Prom memory protects against loss of programming due to power failure.
  • Accurate crystal controlled clock.
  • Momentary and/or Latching Events.
  • 50 individually programmed daily/weekly events.
  • Block programming capacity can accommodate a total of 350 events per week.
  • 10 programmable Holiday dates.
  • "First man in" option.
  • Standard or Daylight Savings Time settings.
  • Automatic compensation for leap year.

Input
  • 12 to 24 volts AC or DC operation
Relay
  • Form "C" relay contacts are rated 10A @120VAC/28VDC.
  • Standby current: 10mA (relay off) 50mA (relay on).
Visual Indicators
  • Alphanumeric LCD display simplifies programming.
Battery Backup
  • Built-in charger for 12VDC sealed lead acid or gel type batteries(Max charge current 100mA).
  • Optional lithium battery backup maintains clock.
  • Order Altronix part # LB2032.
Temperature
  • Operating -20ºC to 49ºC ( -4ºF to 120ºF).
  • Storage -25ºC to 70ºC ( -13ºF to 158ºF).
  • Relative Humidity 85% +/- 5%.

Item#:
PT724A
 
Spec Sheet
You must be logged in to order this item. Log in here

System Enhancement Module (SEM) for Vista Panels (AT&T)

The Alarm.com System Enhancement Module (SEM) is the most cost-effective and comprehensive solution for migrating compatible Honeywell/ADEMCO VISTA-10P, VISTA-15P,
and VISTA-20P panels.  The SEM supports the 4G LTE cellular network and optional Broadband Ethernet, ensuring the longest life cycle with the most secure and reliable service.
Features
• Fast, reliable, & secure wireless signaling
• Home automation & energy management
• Support for Z-Wave Plus devices
• Video monitoring
• No separate power supply needed
• Over the air (OTA) upgrades
• CID and SIA central station signaling
• Internal antennas
• Cover & wall tamper included
• Externally facing LEDs for visual feedback
• Broadband as an optional secondary communication path
• Remote monitoring & control via web/mobile
• Remote panel configurations with Uploader/Downloader, including Add Sensors
• Remote access and management of locally saved user codes 
Item#:
ADC-SEM300-VT-AT
 
Data Sheet
You must be logged in to order this item. Log in here
|◀ ◀ 241 - 252 of 3613 ▶ ▶|
View:
(Denotes required field.)