S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
The TS-10U is a push button, battery-powered transmitter for the RCTD-20U (Wireless 2000). It allows the user to send a signal back to the RC-20U chime box and create a chime for notification purposes, as well as triggering or releasing other devices such as magnetic door locks and lighting.
Features:
This wireless keychain remote (FOB) provides 4 push buttons, LED feedback indicator and features Elk's industry leading two-way technology. From the remote it is possible to arm, disarm, check status, and trigger a panic alarm.
Includes:
- ELK-6010 Keyfob
- Replaceable 3V Lithium Coin Cell Battery (CR2032)
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- Status inquiry button & LED indicator provide arm, disarm, and alarm memory status
- 902 Mhz - 928 Mhz frequency hopping
- Dimensions: 1.50 in. W x 2.32 in. L x .50 in. D
- Battery: CR2032 Lithium Coin Cell
The ELK-6011 Single Button Panic Sensor has a stylish new look and now has a replaceable battery! It features a Single press and hold button and Red LED feedback indicator. The typical application for this sensor is for activating a panic or emergency alarm.
Includes:
- ELK-6011 Panic Button
- 3V Lithium Coin Cell Battery
- 30 inch Clear Plastic Lanyard
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- Single press and hold button and red LED feedback indicator
- Water resistant lanyard included
- 902 Mhz - 928 Mhz frequency hopping
- Size: 1.50 in. W x 2.32 in. L x .50 in. D
- Battery: CR2032 Lithium Coin Cell
- Simple one button operation
- Powered by replaceable CR2032 battery
- RF frequency: 319.5 MHz
- Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
- Battery type: One (1) CR2032 3VDC lithium coin-cellĀ
- Operating Temp Range: 32 to 120°F (0 to 49°C)
- Dimensions: 2.37" L x .1.5" W x 0.44" D
The HUS-7A is a single button, latching hold-up switch designed to provide a rapid signal to alarm systems. It is activated by pressing down the single button switch.
A status window indicates the condition of the switch: RED (alarmed), BLUE (armed).
A U-shaped key is supplied to reset the HUS-7A.
The hold-up switch sends a signal to a dedicated 24 hour hold-up circuit of a burglar control panel.
Features: