• Enclosure: 4.75 in. x 2.25 in. (Diameter x Depth) Black, ABS plastic base with slip-resistant feet and 3 x AAA battery housing for optional audible message on button press Red, ABS plastic, spring-loaded push button
• Electronic Signaling: Battery-powered filter circuit with integrated 319.5 MHz (crystal-controlled) Interlogix-compatible transmitter with 64-minute supervisory interval
• Sensing Interface: Filtered, normally open (i.e. when not pressed), momentary contact switch
• Battery Life: Replaceable 3x AAA battery: 2+ years

The PG9929 Wireless PowerG 4-button key is a wireless key with a slim design which combines easy management of the security system with the added confidence of personal portable protection. The modern, compact key lets users easily arm/disarm the system as they approach the building or call for help when in close proximity to or inside the building.

The PG9929 Wireless PowerG key provides both visual and audible verification of the successful execution of any requested commands. The dual confirmation that the message has been executed by the security system offers peace of mind to users.
The PG9929 can also be used to provide system information back to the user. For instance, if a system trouble event is present, the PG9929 will provide notification to the user via the onboard message LED.

Features:

• 4 programmable function keys
• Visual and audible indicator to acknowledge requested action
• Full 3-seconds delay on panic function to reduce false alarms
• Visible signal quality indication shown on the device
• Prolonged battery life (5 years with typical use)
• Dimensions: 60 x 34.5 x 12.5mm (2.3 x 1.3 x 0.5in)

The Model ET-1B Emergency Transmitter is a single-channel transmitter normally used as a panic button in security systems. It is also used in many remote switching applications where a portable transmitter is required. Pressing both buttons on the sides of the transmitter at the same time will send a transmission.

Features:

• 2-Button lockout operation
• Water resistant
• Adjustable lanyard with breakaway release
• Standard digital format: 256 selectable codes
• Powered by one 12-volt battery (included)
• RF frequency: 303.875 MHz
• 1.72 in. W x 1.72 in. H x 0.75 in. D
• Order number: SNT00054B

The HUS-7A is a single button, latching hold-up switch designed to provide a rapid signal to alarm systems. It is activated by pressing down the single button switch.
A status window indicates the condition of the switch: RED (alarmed), BLUE (armed).
A U-shaped key is supplied to reset the HUS-7A.
The hold-up switch sends a signal to a dedicated 24 hour hold-up circuit of a burglar control panel.

Features:

• Form C contact
• U-shaped key reset
• Status window indicator