|◀ ◀ 25 - 36 of 718 ▶ ▶|
View:

7.2V 3.6Ah Ni-MH battery for I MPASSA alarm systems.

Item#:
SCW-BATTERYHC
You must be logged in to order this item. Log in here

IQ Panel 2 7V AC Adapter

The IQ Panel 2 Power Supply is a replacement power supply for the IQ Panel 2 and 2 Plus. Includes 6' wire with barrel connector and is available in a 5.5v/1A or a 7v/1A supply.
  • Input: 100-240V~50/60Hz 0.3A Max
  • Output: 7V/1000mA
  • For use with IQ Panel 2 and 2 Plus, Rev E or higher
Item#:
QR0051-840
You must be logged in to order this item. Log in here

Protects up to 4 Pairs of SL C/IDC/NAC circuits. DTK-2MB m

The DTK-TSS3 includes a 2-position hardwired base to add surge protection for signaling and notification circuits.

  • Hard-wired base for 2MHLP/2MHLPB modules to protect up to 4 SLC, NAC, IDC and PIV circuit pairs (2MHLP modules sold separately)
  • Perfect solution for building-to-building notifier and communication runs
  • Installed in a NEMA 4X enclosure

Item#:
DTK-TSS3
 
Spec Sheet
You must be logged in to order this item. Log in here

P124 packed with Two 12V, 5 Ah Batteries

Includes:
  • ELK-P624 Power Supply Board
  • ELK-TRG2440 Transformer
  • ELK-UB12 12" Metal Can
  • (2) ELK-1250 12V 5Ah Sealed Lead Acid Battery
  • Battery Cable Assembly
  • 4 pieces of Double Sided Tape
  • Instructions 
Item#:
P124K
 
Spec Sheet
You must be logged in to order this item. Log in here

24VAC/7.25A, 28VAC/6.25A XFMR 5 amp) or 28VAC/175VA (6 amp),

Altronix T2428175 open frame transformer provides power for electronic power supplies and equipment including security, access control, and surveillance devices.

Input: 115VAC 50/60 Hz, 1.6A
Output: 24VAC/175VA (7.25A) or 28VAC/185VA (6.25A) supply current

Item#:
T2428175
 
Spec Sheet
You must be logged in to order this item. Log in here

Relay; SPDT, 12/24V, Big terminals, (6 pack)

The ELK-912B is a heavy duty relay module featuring 12 or 24V DC selectable operation, SPDT Form "C" contacts, low current draw, voltage input LED, and high quality large cross-head terminals. It is ideal for general purpose switching of devices or high current loads. Also available in a 6 pack (ELK-912B6) which is packaged as multiple relay modules grouped on a pre-scored break-off circuit board.
  • High Quality Cross-head Terminals
  • 12 or 24 Vdc Selectable Operation
  • Low Current Draw
  • Voltage Input LED
  • Form "C" Dry Contacts
  • Great For General Purpose Switching
  • Small, Compact Size
  • Double Sided Foam Tape Provided For Mounting
  • Packaged in Reusable Poly Storage Box
  • Operating Voltage: 12 or 24 Volts DC Nominal
  • Current Draw: 35mA, triggered (relay on)
  • Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
  • Min. Pull-in Voltage: 9VDC on 12V setting, 19VDC on 24V setting
  • Size: 2" X 1.5" (51mm X 38mm) Ea
Item#:
912B6
 
Spec Sheet
You must be logged in to order this item. Log in here

Low Battery Cutoff & Master Power Switch

The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply. In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent "deep discharging" of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.
Includes:

  • 1 Low Battery Cutoff & Master Power Switch
  • 2 pieces of Double Sided Tape
  • Instructions
Features:
  • Works With Any 12 Volt Control Panel
  • Automatic Low Battery Cutoff Protects Battery From Deep Discharge
  • AC and Battery On / Off Power Switch
  • Visual LED Power Indicator
  • Installer Friendly - Small Compact Size
  • Includes AC Wires & Battery Leads
  • Fits Standard Snap Track
  • Includes Double Sided Mounting Tape
  • Lifetime Limited Warranty
Specifications:
  • Relay Contacts: Form "C", 7 Amp @ 28 VDC
  • On / Off Power Switch: DPDT Slide Type
  • AC Power Leads: 18 AWG, 18" Length
  • Maximum Transformer Size: 18 VAC
  • Battery Leads: 18 AWG, 18" Length
  • Low Battery Cutoff Voltage: ~ 10 VDC
  • Size: 1.75 in. X 2.185 in.(44.5mm X 55.5mm)
Item#:
965
 
Spec Sheet
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 24/28VAC, Board

Altronix SMP3 power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Extremely compact design.
  • Includes battery leads.
  • Snap Track compatible (order Altronix model number ST3)

Specifications:
Input:
  • 16VAC to 28VAC.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3
 
Spec Sheet
You must be logged in to order this item. Log in here

16 VAC 100VA OPEN FRAME XFMRat .25 amp), 115VAC input

Altronix T16100 open frame transformer provides power for electronic power supplies and equipment including security, access control, and surveillance devices.

Input: 115VAC 50/60 Hz, 1A

Output: 16VAC/100VA (6.25A) supply current

Item#:
T16100
 
Spec Sheet
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

SMP3E power supply/charger converts a low voltage AC input into 6VDC, 12VDC or 24VDC @ 2.5A continuous supply current. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Includes battery leads.
  • Power supply/charger with enclosure.
  • Fits one (1) 12VDC/7AH or two (2) 12VDC/4AH batteries.

Specifications:
Input:
  • 6VDC or 12VDC output use TP1640 or 24VDC output use T2428100.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
    • 24VDC: 31 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 55.2VA.
    • 24VDC: 115VA.

Item#:
SMP3E
 
Spec Sheet
You must be logged in to order this item. Log in here

Power Supply Charger, Single Output, 6/12/24VDC @ 2.5A, 16-28VAC

Altronix SMP3ET power supply/charger converts a low voltage AC input into a 6VDC or 12VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Specifications:
Input:

  • 16VDC from TP1640 plug-in transformer.
Output:
  • 6VDC or 12VDC selectable output.
  • 2.5A continuous supply current.
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Battery short circuit protection (circuit breaker).
Visual Indicators:
  • AC input and DC output LED indicators.
Temperature:
  • Operating: 0° C to 49° C (32° F to 120° F).
  • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr. (approx.):
    • 6VDC: 8 BTU/Hr.
    • 12VDC: 15 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC/12VDC: 276VA.

Item#:
SMP3ET
 
Spec Sheet
You must be logged in to order this item. Log in here

UL Listed Transformer for WTK5504 Wireless Touchscreen Keypad & HS2LCDWF

Item#:
9VADAPTER-US
You must be logged in to order this item. Log in here
|◀ ◀ 25 - 36 of 718 ▶ ▶|
View:
(Denotes required field.)