|◀ ◀ 265 - 276 of 718 ▶ ▶|
View:

240/480 VAC Parallel Protector , 2W(+G), UL1449 Listed SPD T

Item#:
DTK-240/480CM+
You must be logged in to order this item. Log in here

24 VDC, 4 A, med cabinet

Item#:
PS5-BFS-24
You must be logged in to order this item. Log in here

UL POWER DISTRIB UNIT W/CB dule - Converts AC or DC power

Item#:
PD4ULCB
 
Spec Sheet
You must be logged in to order this item. Log in here

Grounded Surge Suppressor (U se with Basic Probes)

Item#:
GRND2
You must be logged in to order this item. Log in here

24V 750ma SPRVISED PS/CHGR 24VDC @ 750mA, AC & battery mo

Item#:
PM224
 
Spec Sheet
You must be logged in to order this item. Log in here

12/24 VDC, 2.5/4 A, w/ FAI out put, med cabinet

Item#:
CPS240D-UL/CSA
You must be logged in to order this item. Log in here

Relay Module, 6/12/24VDC, DPDT Contacts @ 1A - 120VAC or 2A - 28VDC

RBST relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.

Input Voltage

  • 6VDC, 12VDC or 24VDC operation.
  • Current draw: 30mA.
Contact Rating
  • 1A/120VAC or 2A/28VDC DPDT contacts.
Temperature
  • Operating temperature: -25ºC to 55ºC (-13ºF to 131ºF).
  • Storage temperature: -25ºC to 70ºC (-13ºF to 158ºF).
  • Relative Humidity 85% +/-5%
  • System AC input VA requirement:
  • 6VDC: 1.8VA.
  • 12VDC: 3.6VA.
  • 24VDC: 7.2VA.

Item#:
RBST
 
Spec Sheet
You must be logged in to order this item. Log in here

Connects 4 17 Ah batt for 12 V DC @ 68 Ah or 4 12 Ah batt for

Item#:
BH-4B17P
You must be logged in to order this item. Log in here

Single Relay Module with Terminals

Item#:
RM-1C
You must be logged in to order this item. Log in here

24 VAC, 4 AMP, 8 Power Limited Outputs, 2U, Listed

Item#:
RM-248
You must be logged in to order this item. Log in here

Supervised Remote Power Supply

The ELK-P212S is a Supervised Remote Power Supply / Battery Charger, providing 12 VDC output with up to 2 Amps of total current. It supervises the AC Power Input as well as the rechargeable Battery, and can report abnormal conditions back to an ELKM1 Control over the RS485 four (4) wire data bus. It also features relay outputs for AC and Low Battery to allow "stand-alone" operation with other Controls (Security, Access, CCTV products, etc.). Power from the P212S can be used to increase the capacity of a control, or to remotely power devices such as motion detectors, keypads, zone expanders, sirens, annunciators, etc.
  • Regulated 12VDC Output with up to 2 Amps of current 
  • Energy Efficient ESMT - Elk Switch Mode Technology ensures low idle power with maximum output headroom 
  • Automatic output over-current protection (PTC) 
  • Master AC and Battery ON / OFF Power Switch 
  • Visual AC Power Indicator 
  • Innovative EBT - Elk Battery Technology circuit provides maximum battery life
    • Controlled charge ramp and maintenance algorithm
    • Low Battery cut-off protects battery from deep discharge 
  • M1 Control allows:
    • Remote power reset of powered peripherals
    • Data-bus supervision of AC and Battery status 
  • Stand-alone flexibility:
    • Two (2) sets of DC outputs
    • One (1) on-board relay to supervise battery status
    • One (1) on-board relay to supervise AC status
  • AC Input: 16.5VAC, 45VA (ELK-TRG1640 or equiv.) 
  • DC Output Voltage: 13.8 Volts D.C. +/- 5% 
  • Current Rating: 2.0 Amps 
  • Wattage: 30 Watts 
  • DC Output Protection: Auto Resetting PTC 
  • Rechargeable Battery Size: Max. 12 Ah 
  • Low Battery Cutoff Threshold: ~10 Volts. 
  • Load Regulation: + / - 2%
Item#:
P212S
 
Spec Sheet
You must be logged in to order this item. Log in here

12/24 VDC, 5 output distributi on board, UL Listed

Item#:
FB-124-UL-5
You must be logged in to order this item. Log in here
|◀ ◀ 265 - 276 of 718 ▶ ▶|
View:
(Denotes required field.)