S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- Compatible with PowerSeries panels v4.5 and higher
- 4-wire keybus and included PC-LINK header hookup
- Compatible with leading-edge interactive solutions supported by DSC
Item#:
IT-230
You must be logged in to order this item.
Log in here
- Each line card supports up to 512 supervised and up to 1,536 accounts total
- Works over local LAN/WAN network as well as the Internet
- 128-bit AES encryption
- Polling and hardware substitution protection for the transmitters
- Compatible with 10/100BaseT networks
- UL standard & encrypted line security
Item#:
SG-DRL3-IP
You must be logged in to order this item.
Log in here
- Compatible with IMPASSA Self-Contained 2-Way Wireless Security System
- Back up and primary LTE alarm communication with 3G fallback capability
- Panel remote uploading/downloading support via cellular
- Supervision heartbeats via cellular
- 128-bit AES encryption via cellular
- SIA and Contact ID protocol
- Signal strength, wireless technology, and trouble display via IMPASSA panel menu
- Full event reporting
- Compatible with Sur-Gard System I/II/III/IV/5 monitoring station receivers
- Command and Control via SMS
- 2-Way voice over LTE or 3G (with IMPASSA SCW9057 v1.1+)
- Antenna Extension Kits available: LTE-8ANTP, LTE-15ANT, LTE-25ANT, LTE-50ANT
- Compatible with ADT Pulse interactive solution
Item#:
LE2077-ADTAT
You must be logged in to order this item.
Log in here
The Alarm.com Dual Path System Enhancement Module (SEM) is the most cost effective and comprehensive solution to migrate compatible DSC PowerSeries PC1616, PC1832 and PC1864 panels to Alarm.com’s award winning interactive services. The Dual Path SEM supports the 4G LTE cellular network and optional Broadband Ethernet. This ensures the longest lifecycle with the most secure and reliable service.
Features
- Supports the 4G LTE cellular network
- Fast, Reliable & Secure Wireless Signaling
- No Separate Power Supply Needed
- Remote Monitoring & Control via Web/Mobile
- Expansive Coverage Footprint
- Home Automation & Energy Management
- Easy-to-Read Diagnostics
- Over the Air (OTA ) Upgrades
- Easy Remote Programming with AirFX™
- CID and SIA Central Station Signaling
Item#:
ADC-SEM210-PS-AT
You must be logged in to order this item.
Log in here
- Uses LTE cellular network for high-speed, reliable and low-cost communications to an IP receiver Automatically switches to 3G (HSPA/ HSPA+) if LTE service is not available
- Compatible with control panels that communicate using the Contact ID and SIA (300 baud) formats
- Full event reporting
- 2 on-board inputs
- 2 on-board outputs (open collector)
- Activation and initialization via website or mobile interface provided by C24 Communications
- View communicator status directly from your mobile phone to support on-site or remote troubleshooting
- PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts
- SMS command & control for panel arm/disarm
- PTM call routing to direct cellular signals to multiple receivers based on dialed number
- Advanced carrier selection to secure a suitable cellular connection
- Two unique trouble display models
- Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers
- Mobile Site for Easy Installation and Comprehensive Maintenance
- Advanced Panel Transmission Monitoring
- SMS Command & Control
- Input Voltage 13.8 Vdc
- Current Draw (without battery) 40 mA (standby) 180 mA (transmitting)
- The LE4000 has been listed by UL/ULC for Residential Fire and Burglary and UL/ULC Commercial Burglary installations.
- Dimensions 8.5" H x 4.9" W x 1.3" D (216mm x 124mm x 33mm)
Item#:
LE4000RF-ADTAT
You must be logged in to order this item.
Log in here
Item#:
IT-230 ADT
You must be logged in to order this item.
Log in here
Seconds count in an emergency situation to save lives and assets. ELK's new C1M1 Dual Path Communicator significantly reduces transmission time of emergency messages. It connects directly to the M1 Control and does not require dial capture or data bus decoding which leads to delays with other communicators. In addition, there is no cloud server to compromise or delay the communications.
C1M1 provides super-fast, full data communications to Central Monitoring Stations over IP and cellular pathways. Transmissions are automatically directed over the best pathway for quickest communications. Periodic tests are sent over both pathways to ensure reliable communications and C1M1 can automatically report a pathway outage over the remaining pathway.
C1M1 also supports remote access with no port forwarding or extra fees. Installers can easily activate and manage C1M1 communicators, as well as remotely program the M1 control over the IP or cellular pathway. End users can remotely arm/disarm the M1 control in addition to viewing system status, accessing recent history, and receiving email/text alerts.
- Dual reporting pathways: IP and cellular
- No dial capture, data bus decoding, or cloud servers to delay or compromise communications
- Auto directs over first available and/or best pathway for quickest communications
- Remote access to M1 controls with no port forwarding or extra fees!
- Supports ElkRP2 programming upload/download over IP or cellular pathways
- Supports remote control via web portal and FREE ElkLink Mobile app for iOS and Android
- Supports third party apps eKeypad (for iOS) and M1 Touch Pro (for Android)
- Provides email and text message alerts for arm, disarm, and alarm events
Item#:
C1M1 LTEV-ELK
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)