|◀ 265 - 276 of 545 ▶|
View:
Item#:
PK612A
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The GTW-VOA is a video output adaptor for the GT Series multi-tenant video entry system. The adaptor will convert the 2-wire video signal from the GT Series to a standard composite video output signal. This allows the video image from the entry panel to be seen on any standard CCTV monitor or TV (video input). The video can also be recorded if connected to a DVR or other recording device. The adaptor connects to the common video bus of the GT Series and will output video whenever any video call is active on the system.
  • Composite video output
  • Wall / Din rail mountable
  • Connects to video bus controller
  • BNC connector for easy connection to external device
  • Provides video signal whenever entrance station is in use
Item#:
GTW-VOA
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Non-volatile memory, no batteries required
  • Stores up to seven 32-digit phone numbers per input (fourteen 32-digit numbers total)
  • 2 minutes of record time (1 minute per input)
  • Programmable message repeat counter
  • Programmable lap counter
  • Two inputs programmable for normally open or normally closed and enabled or disabled
  • Programmable ring delay for remote programming and alarm polling
  • Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
  • Programmable resume timer for each input (time following reset for input to become active again)
  • Call progress detection
  • Programmable ringback limit for call progress
  • Remote security and access codes
  • Local or remote programming and recording
  • Compatible with the RC-2A and RC-3 remote DTMF controllers
  • Phone numbers may be programmed as pager numbers (no voice message played)
  • Programmable hookswitch flash before dialing
  • Local reset input
  • Local alarm state indication LED
Item#:
K-202-DVA
You must be logged in to order this item. Log in here
Item#:
IPS-VPS
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Box set includes all parts needed for 1 cashier/security window system
Inconspicuous units do not obscure faces of those approaching a ticket/customer window for added visibility and security
Flexible gooseneck microphone can be adjusted to virtually any position
Computer style headset can be used (not supplied by Aiphone)
Uses voice-actuated communication (VOX) system, requiring no additional operations during conversation
When the TALK switch is off, the operation unit is put on standby, but sound from public side is still heard at reduced volume
By linking the system to a motion sensor, communication mode is automatically activated when a customer is present
  • Communication:
    • Hands-free (VOX) 
    • Transmit output: 3W 4Ω
    • Receive output: 1.5W 16Ω
  • Wire Type:
    • Speaker Driver to Control Unit: 2x2-cond., overall shield – use Aiphone #822202 or #821802
    • Power Supply to Control Unit: 2-cond., overall shield – use Aiphone #8222202 or #821802
  • Distance: Power Supply or Speaker Driver to Control Unit: 66' (22AWG/18AWG)
Item#:
IM-1
You must be logged in to order this item. Log in here
|◀ 265 - 276 of 545 ▶|
View:
(Denotes required field.)