S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
You must be logged in to order this item.
Log in here
- IP compatible
- Weather and vandal resistant
- For indoor or outdoor use
- Normally Open dry contact output(24V AC/DC, 500mA)
- Contact input for call-in
- Connects using CAT-5e/6 cable
- 802.3af PoE compliant
Item#:
IX-NVP
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
The IX-10AS is a network adaptor that allows an LEF or NEM series sub station to work with the IX Series intercom. The IX-10AS supports up to 10 sub stations. Each station port on the IX-10AS plugs directly into a PoE network connection using a CAT5e/6 cable. The LE/NE sub station wires into the adaptor input using a 2 or 3 conductor cable, depending on the sub station. Each adaptor port has two dry contact outputs, typically used for camera call up and door release.
- Compatible with all LE sub stations
- Compatible with all NE sub stations
- Form C dry contact closure for door release (24V AC/DC, 500mA)
- Form C dry contact closure for camera call up (24V AC/DC, 500mA)
- Adjustable volume level via programming
- 802.3af PoE compliant
- Din rail mounting, IX-1AS only
- Rack mounting
Item#:
IX-10AS
You must be logged in to order this item.
Log in here
AtlasIED IP-SDMFLED indoor wall mount IP speaker with LED display and flasher leverage the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.
AtlasIED IP-SDMFLED registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting both visual text and audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, & scheduled announcements, while leveraging the WAN/LAN Network Architecture.Â
When used within a Cisco Environment, these same IP speakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
Features
- Network Features
- Dynamic or Static IP Address
- IEEE802.3 10/100Base-T Ethernet
- IEEE 802.1q Tagging
- IEEE 802.11AT Compliant
- VoIP Standard Audio: G.711 u-law/a-law (64 kbit/s) or G.722 Wideband Audio (64 kbit/s)
- Auto Provisioning: DHCP Option 66, 150, or TFTP Server or DHCP Option 72 for HTTP Server
- Auto Registration: SLP for InformaCast or DHCP Option 72 for SA-Announce or GCK
- Static Configuration: HTTP GUI for Static Configuration or Cisco SRST
- Audio Features
- Integrated Amplifier 15-Watt Total Power: Primary Speaker Output 8 ohm
- Aux Audio Line-In Unbalanced (2.8Vpp 10K)
- Aux Audio Line-Out Unbalanced (2.8Vpp 10K)
- Additional Features
- 2 General Purpose Inputs
- PoE+Enabled
- 1 General Purpose Output (2A @ 30 VDC)
- Phone/Night Loud Ringer
- External Power Supply Option
Item#:
IP-SDMFLED
You must be logged in to order this item.
Log in here
- Direct select buttons
- Backlit directory
- Weather resistant
- Door release powered by Entrance Station
- Communication: Hands-free
- Door Release: 9.5~20V AC, 70Ω or higher resistance - use EL-12S
- Temp. Rating: 14° ~ 140°F (-10° ~ 60°C)
- Material: Aluminum cover
- Mounting: Surface mount directly to wall
- Wire Type: Entrance Station to Tenant Station: 2-cond., overall shield - use Aiphone #822202 or 2-cond., low cap, PE insulation, solid, non-shielded - use Aiphone #871802
- Distance: Power Supply to Entrance Station (cumulative): 360'(22AWG) 1,020'(18AWG)
Item#:
DA-4DS
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
- All Call between stations in same residence / office
- Option button for external device control (N/O dry contact, AC/DC 24V 1.6A Max)
- Call tone volume control with LED mute indicator
- Receive volume control
- Optional Call Extension Speaker (IER-2)
- Optional external signaling to 3rd party bell or light using RY-ES (used in lieu of IER-2)
- Door release button (powered by door station)
- Communication: Hands-free (VOX) or push-to-talk (simplex)
- Wire Type:
- Entrance Station to Tenant Master Station: 2-cond., low cap, PE insulation, solid, non-shielded - use Aiphone #871802
- Tenant Master Station to Tenant Sub Station: 4-cond., low cap, PE insulation, solid, non-shielded - use Aiphone #871804
- Between Tenant Sub Stations: 4-cond. + 2-cond. when sharing power - use Aiphone #822206 or #871804
- Distance:
- Power Supply to Tenant Master Station: 180'(22AWG) 510'(18AWG)
- Tenant Master Station to farthest Tenant Sub Station: 330'
- Power Supply to Entrance Station (cumulative): 360'(22AWG) 1,020'(18AWG)
Item#:
DB-1SD
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)