|◀ 25 - 36 of 88 ▶|
View:

The SD500-AIM is an addressable input module that acts as an interface to dry contact devices such as waterflow switches and conventional pull stations. The SD500-AIM mounts to a 4 in. square box.

Features

  • Single contact monitor
  • Support for Class B or Class A wiring
  • Attractive ivory cover plate
  • DIP switch programming for fast installation
  • UL listed
Item#:
SD500-AIM
You must be logged in to order this item. Log in here
Maximum 1,110 point addressable fire alarm control panel. Includes connected panel options, enhanced communications, wireless detection and other advanced features. (Replaces the 5820XL).
  • Connect up to 17 panels with convenient single point communications. Copper wire or fiber optic cable panel connectivity can be used within the same linked system
  • Multiple Signal Line Circuits (SLCs) can be used within one system limited only by maximum points available
  • Built-in dual path IP and POTs communication for reliable dual path backup
  • Built-in USB interface for convenient and speedy programming
  • SWIFT® capable for wireless detection
  • Convenient field-upgradeable firmware
  • Supports up to 16 remote annunciators
  • Programmable date setting for automatic and convenient Daylight Saving Time changes
  • 4 x 20 annunciator with 80 character display and large easy-use keypad
  • Includes access to Jumpstart™, HFSS programming software and the SKST selection tool
  • NAC Circuits: 6; 6 amps power supply
  • Supports Class B (Style 4) and Class A (Style 6) configuration for SLC, SBUS, and Flexput circuit
Item#:
006820
You must be logged in to order this item. Log in here

The SK-RELAY is an addressable relay module that allows an IntelliKnight fire alarm control to switch discrete contacts by code command. The module contains two isolated sets of Form C contacts.

Features

  • Two sets of Form C contacts
  • Rotary address switches for fast installation
  • Relay programming is completely flexible  can be mapped to zone conditions
  • Bright white cover plate
  • SEMS screws for easy wiring
  • UL listed

Item#:
SK-RELAY
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The SK-CONTROL is an addressable notification module and provides supervised monitoring of wiring to the load devices that require an external power supply to operate such as bells, horns, and strobes.

Features

  • Flexible solution for adding notification circuits where needed
  • Rotary address switches for fast installation
  • Support for Class B (Style Y) or Class A (Style Z) wiring
  • Bright white cover plate
  • Polling LED visible through the cover plate
  • Compatible with version 10 and higher 5700, 5808, 5820XL, and 5820XL-EVS IntelliKnight addressable fire alarm control panels programmed for System Sensor protocol
  • UL listed

Item#:
SK-CONTROL
You must be logged in to order this item. Log in here

Fire-Lite's MMF-300-10(A) ten-input monitor module provides an interface between the MS-9050UD, MS-9200UDLS, and MS-9600(UD)LS and normally open contact devices such as pull stations, security contacts or flow switches. Provisions are included for disabling a maximum of two unused addresses.

Features

  • Ten addressable Class B or five addressable Class A initiating device circuits.
  • Removable plug-in terminal blocks.
  • Status indicators for each point.
  • Unused addresses may be disabled.
  • Rotary address switches.
  • Class A or Class B operation.
  • Flexible mounting options.

Item#:
MMF-300-10
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Addressable Fire Alarm Control with Upload/Download, 636-Points

This item has been discontinued and replaced by item 

Addressable Fire Alarm Control with Upload/Download, 636 Points on Two Signaling Line Circuit's (SLC's), with built in Dialer, (2nd SLC Optional, 24VDC

MS-9600LS is a 318-point addressable fire alarm control panel with optional Digital Alarm Communicator/Transmitter (DACT-UD2) and expandable to 636 addressable points with an optional second Signaling Line Circuit (SLC-2LS).

  • Up to 159 detectors and 159 control/monitor modules (total of 318 devices) per SLC (636 with SLC-2LS option card)
  • Uses PS-Tools programming utility
  • LiteSpeed protocol for SLC communication polls 10 devices at a time and operates on standard, unshielded wire
  • Auto programmable function reduces installation time
  • Advanced Fire Technology includes sensitivity testing and automatic drift compensation
  • 7 amps of power distributed across 4 NAC circuits with onboard Sync Select for System Sensor, Gentex , or Wheelock devices
Item#:
MS-9600UDLS
You must be logged in to order this item. Log in here

Addressable SLC single input c onventional input module. desi

This item has been discontinued and replaced by item 
Item#:
FWC-FSLC-EZM1
You must be logged in to order this item. Log in here
|◀ 25 - 36 of 88 ▶|
View:
(Denotes required field.)