Home  >  FIRE  > (x)
|◀ ◀ 1 - 12 of 7307 ▶ ▶|
View:

20V, 50 Watt Audio Amplifier Module

Increases the total EC-50/100 Power output to 100W

Item#:
ECC-50W-25V
You must be logged in to order this item. Log in here

Sync Module 3, Red

Item#:
MDL3R
You must be logged in to order this item. Log in here

RED ENCLOSURE FOR HW-AV-LTE-M FIRE COMMUNICATOR

Connection and mounting is simplified using the enclosure kit.
Item#:
HW-AV-ENC
You must be logged in to order this item. Log in here

Circuit Expander Module

Provides Connections for up to Six Style Z (Class A) or Style Y

Item#:
ECC-CE6
You must be logged in to order this item. Log in here

BATTERY BOX -- MOUNTS UP TO 2, BAT-12260 OR BAT-12550 S

Item#:
BB-55F
You must be logged in to order this item. Log in here

Remote NAC Extender

Remote 4-output NAC Extender, for 6.5A ttl, or 2A, max. on any 1 output. Red 14 x 16" can, connects to 120VAC, supports 24V 16Ah standby batts.  Supervised, fire bus connection. System Sensor and Wheelock NAC sync. (5/system, for 20 add’l NAC circuits ttl.). 3 Programmable relay outputs;  2 low voltage; 1 high-voltage 120V rated relay.
Item#:
GEMC-NAC7S
You must be logged in to order this item. Log in here

DUCT SAMPLING TUBE, 3' WITH HO LES

Item#:
DST3
You must be logged in to order this item. Log in here

Power Supply/Charger, 8 Fused Relay Outputs, 12/24VDC @ 4A, FAI, 115VAC

Altronix AL400ULACM converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 4A @ 12VDC or 3A @ 24VDC continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Features

  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
  • Fire Alarm disconnect input options:
  • a) Normally open (NO) or normally closed (NC) dry contact input.
  • b) Polarity reversal input from FACP signaling circuit.
  • Alarm output relay indicates that FACP input is triggered (form "C" contact rated @ 1A 28VDC not evaluated by UL).
  • Short circuit and thermal overload protection.

Item#:
AL400ULACM
You must be logged in to order this item. Log in here

LOW FREQ SOUNDER BASE; WHITE

Item#:
B200SR-LF-WH
You must be logged in to order this item. Log in here

RESISTOR 47K OHMS

Item#:
ELR-47K
You must be logged in to order this item. Log in here

Isolator Module

  • Generally used at each T-tap branch to limit the effect of short circuits on a branch to the devices on that branch in Style 4 loops.
  • Isolates devices so they can continue to operate normally in the event of a short-circuit on the SLC in Style 7 operation.
  • Powered by SLC loop directly, no external power required.
  • Mounts in standard junction boxes
  • Integral LED blinks to indicate normal condition.
  • Supports a maximum of 25 devices in-between isolators, except when using relay bases.
Item#:
I300
You must be logged in to order this item. Log in here

CABINET, HOLDS 1 OR 2 MULTI-AD DRESSABLE MODULES

Item#:
BB-2F
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 7307 ▶ ▶|
View:
(Denotes required field.)