The ECC-RM is an optional Remote Microphone that is compatible with the ECC-50/100(E) Emergency Command Center for fire protection applications. It is part of the family of external remote consoles that allows for extending the operator interface to remote locations within a building.

• External remote console that provides ALL CALL paging broadcasts over the speaker zones of the ECC-50/100(E) primary operating console.
• Modular design for maximum system flexibility and easy expansion
• Supports both Class A (Style Z) and Class B (Style Y) wiring.
• A maximum of eight ECC-RM’s can be connected to an ECC-50/100(E) primary operating console.
• Built-in microphone with push-to-talk feature that can be used for ALL CALL paging.
• Sturdy cabinet design with a keyed or an optional thumb lock to prevent unauthorized access

Provides Connections for up to Six Style Z (Class A) or Style Y

Altronix AL400ULACM converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 4A @ 12VDC or 3A @ 24VDC continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Features

• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
• Fire Alarm disconnect input options:
• a) Normally open (NO) or normally closed (NC) dry contact input.
• b) Polarity reversal input from FACP signaling circuit.
• Alarm output relay indicates that FACP input is triggered (form "C" contact rated @ 1A 28VDC not evaluated by UL).
• Short circuit and thermal overload protection.

• Generally used at each T-tap branch to limit the effect of short circuits on a branch to the devices on that branch in Style 4 loops.
  
• Isolates devices so they can continue to operate normally in the event of a short-circuit on the SLC in Style 7 operation.
  
• Powered by SLC loop directly, no external power required.
  
• Mounts in standard junction boxes
  
• Integral LED blinks to indicate normal condition.
  
• Supports a maximum of 25 devices in-between isolators, except when using relay bases.

• 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
• Sync protocols include Potter/Amseco, Faraday, Gentex®, System Sensor®, and CooperWheelock®.
• Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
• Compatible with 12VDC or 24VDC fire panels.
• Output loop supervision steered to input 1 or input 2.
• Signal circuit trouble memory (helps identify intermittent loop problems).
• Common trouble input and output for external trouble signals tie-in.
• Ground fault detection.
• Unit includes power supply, red enclosure, cam lock, and battery leads.