|◀ 1009 - 1020 of 1223 ▶|
View:
ELK Sealed Lead Acid Batteries are excellent for the following applications with regard to size, Amp hour rating, and proper terminal connections: battery backup (for Access Control Systems, Fire Alarm Systems, and Security Alarm Systems), emergency lights, lighted exit signs, and uninterruptible power supplies.
  • Rechargeable
  • All virgin materials for long life
  • More lead for greater Ah capacity
  • Size comparable to other manufacturer's lower Ah sizes
  • UL Recognized Component
  • Nominal Voltage: 12 Volts
  • Rated Capacity: 1.3 AH (20 hour rate)
  • Length: 3.82" (97mm)
  • Width: 1.77" (45mm)
  • Height: 2.05" (52mm)
  • Total Height w/ terminals: 2.24" (57mm)
  • Terminals: F1-Faston Tab No. 187
Item#:
1213
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
151D033S10KXN2N0
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The ASCO Model 171 Surge Protective Device is a solid state, two-line telephone interface protector module. This unit is specifically designed to protect both phone lines required by commercial fire/security panels.

  • Tip to ring protection
  • Tip and ring to ground protection
  • Over-current protection
  • Resettable solid state fuses  PTCs
  • Requires accessory PCB1B base
  • PTU (Pass Thru Unit) available for troubleshooting

Item#:
PC2-TEL
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The ELK-955 is a Two-Line RJ31X/38X Telephone Jack containing solid state transient suppression designed to protect the telephone inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings.
  • Superior Solid State Surge Suppression
  • Rapid Response Time
  • Protects Two Incoming Telephone Lines
  • Clamps Line-To-Line & Line-To-Ground
  • Self-restoring After Surges Within Ratings
  • RJ31/38X 8-Pin Modular Jacks
  • Convenient Test points For Lineman's Test set
  • Surface Mount Enclosure
  • Response Time: < 1 Nanosecond
  • Breakover Voltage: 300 Volts
  • Peak Pulse Current: 100 Amps
  • Ground Wire: 24" - 14 Gauge Stranded
  • FCC Reg. No. 5K6USA-23140-XP-N Ren No. 0.0B
  • Size: 4.4" x 3" x 1.15"
Item#:
955
You must be logged in to order this item. Log in here

The ELK-951 is an RJ31/38X Telephone Jack containing solid state transient suppression designed to protect the Telephone inputs on an alarm control. It responds to power surges and transients in less than 1 nanosecond, automatically restoring after each surge within the specified ratings.

  • Superior Solid State Surge Suppression
  • Rapid Response Time
  • Protects a Single Incoming Telephone Line
  • Clamps Line-To-Line & Line-To-Ground
  • Self-restoring After Surges Within Ratings
  • RJ31/38X 8-Pin Modular Jacks
  • Convenient Test points for Lineman's Test set
  • Surface Mount Enclosure
  • Response Time: < 1 Nanosecond
  • Breakover Voltage: 300 Volts
  • Peak Pulse Current: 100 Amps
  • Ground Wire: 24" - 14 Gauge Stranded
  • FCC Reg. No. 5K6USA-23140-XP-N Ren No. 0.0B
  • Size: 4.4" x 3" x 1.15"
Item#:
951
You must be logged in to order this item. Log in here
|◀ 1009 - 1020 of 1223 ▶|
View:
(Denotes required field.)