600 lbs. holding force Magnalock with automatic dual voltage. Recommended for applications where physical assault on the door is not expected, like access controlled interior rooms and secure areas within buildings.

• Patented instant release circuit - no residual magnetism
• Surface mounts easily with a minimum of tools
• Fully sealed electronics - tamper proof and weatherproof
• Mounted using steel machine screws into blind finishing nuts
• Architectural brushed stainless steel finish (US32D/630)
• All ferrous metal surfaces plated to MIL specification
• Hardware accessories available to configure any opening
• Dress Covers available
• Ten feet [3.05m] of jacketed, stranded conductor
• Lock options include BondSTAT magnetic bond sensor and integrated door position switch
• UL Listed
• MagnaCare lifetime replacement, no fault warranty

• Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor
• Mounted next to door
• Momentarily pressing the button releases door for 30 seconds
• Retriggerable
• Single Gang or Narrow Stile
• SPST 3 Amp wet N/C contacts
• Operates on 12 or 24 VDC (must be same voltage as the installed lock)
• For indoor use only
• Includes switchable green, red and blue ADA lenses
• UL Listed

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding Product features vehicle, pedestrian, or stock gate access control.

Features

• 2,000 lbs holding force
• Operates under preload up to 100lbs
• Automatic dual voltage - no field adjustment required
• Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
• Self-aligning receiver (+/- 1/2 in. horizontally) helps compensate for gate misalignment and sag
• Tamper resistant cast housing
• Optional latch status monitor
• Surface mount
• MagnaCare lifetime replacement, no fault warranty

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding Product features vehicle, pedestrian, or stock gate access control.

Features

• 2,000 lbs holding force
• Operates under preload up to 100lbs
• Automatic dual voltage - no field adjustment required
• Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
• Self-aligning receiver (+/- 1/2 in. horizontally) helps compensate for gate misalignment and sag
• Tamper resistant cast housing
• Optional latch status monitor
• Surface mount
• MagnaCare lifetime replacement, no fault warranty

With adjustable timer, door status switch, lock sens/relay and LED

Features

• Weather and vandal resistant construction proven over thousands of installations
• Surface and mortise mount models
• Compatible with all access/egress systems
• Field selectable 12/24V DC operation
• On board MOV power surge protection prevents damage to mag lock
• A wide range of mounting brackets and spacers available
• Lifetime Warranty