|◀ ◀ 1 - 12 of 11344 ▶ ▶|
View:

4-7/8" Strike, Centerline, Fo r Rim Panics, Indoor/Outdoor R

Item#:
EN400RP-12DC-32D-RH
You must be logged in to order this item. Log in here

Electromagnetic Lock with 300- lb (136kg) holding force. 12 o

Item#:
E-941SA-300RQ
You must be logged in to order this item. Log in here

Magnetic Door Holder - Flush-Mount, UL

The UL Listed SECO-LARM Magnetic Door Holders are designed for virtually any remote door release applications, whether residential or commercial. Fail-safe operation, tri-volt coils, and adjustable armature plate allows for easy and flexible installation.
  • For use with door closers to control the release and closing of residential, commercial, and public area doors
  • Adjustable armature plate reduces installation time and adjusts to door alignment changes
  • Low profile design
  • Holding force – 33-lb (15kg)
  • 3 voltages: 12/24 VAC/VDC, and 120VAC
  • Cast aluminum faceplate
  • No residual magnetism for easy release
  • Built-in voltage spike suppressor
  • Use with SECO-LARM door closers
  • Optional extension bars available: 1/2", 3/4", 1", 2", 3", 4", 5", 6", 7" (13mm, 19mm, 25mm, 50mm, 76mm, 102mm, 127mm, 152mm, 178mm)
Item#:
DH-171SQ
You must be logged in to order this item. Log in here

M62 Magnalock- 12/24VDC

  • Patented instant release circuit - no residual magnetism
  • Fully sealed electronics - tamper proof and weatherproof
  • Surface mounts easily with minimal tools
  • Mounted using steel machine screws into blind finishing nuts
  • Architectural brushed stainless steel finish (US32D/630)
  • All ferrous metal surfaces plated to MIL specification
  • Hardware accessories available to configure any opening
  • Dress Covers available
  • Ten feet [3.05m] of jacketed, stranded conductor
  • Automatic dual voltage - no field adjustment required
  • Lock options include BondSTAT magnetic bond sensor, integrated door position switch, conduit fitting, double and face mount models
  • Universal threaded conduit fitting is 1/2 female - 3/4 in. male
  • Split Strike Plates and Offset Strike Plates available
  • UL Listed
  • MagnaCare lifetime replacement, no fault warranty

Item#:
M62
You must be logged in to order this item. Log in here

Gate Lock, 12/24VDC, Fail Locked Monitored

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding Product features vehicle, pedestrian, or stock gate access control.

Features

  • 2,000 lbs holding force
  • Operates under preload up to 100lbs
  • Automatic dual voltage - no field adjustment required
  • Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
  • Self-aligning receiver (+/- 1/2 in. horizontally) helps compensate for gate misalignment and sag
  • Tamper resistant cast housing
  • Optional latch status monitor
  • Surface mount
  • MagnaCare lifetime replacement, no fault warranty

Item#:
GL1-FLM
You must be logged in to order this item. Log in here

M32 Magnalock - 12/24 VDC Satin Stainless Finish

600 lbs. holding force Magnalock with automatic dual voltage. Recommended for applications where physical assault on the door is not expected, like access controlled interior rooms and secure areas within buildings.

  • Patented instant release circuit - no residual magnetism
  • Surface mounts easily with a minimum of tools
  • Fully sealed electronics - tamper proof and weatherproof
  • Mounted using steel machine screws into blind finishing nuts
  • Architectural brushed stainless steel finish (US32D/630)
  • All ferrous metal surfaces plated to MIL specification
  • Hardware accessories available to configure any opening
  • Dress Covers available
  • Ten feet [3.05m] of jacketed, stranded conductor
  • Lock options include BondSTAT magnetic bond sensor and integrated door position switch
  • UL Listed
  • MagnaCare lifetime replacement, no fault warranty

Item#:
M32
You must be logged in to order this item. Log in here

Gate Lock, 12/24VDC, Fail Safe Monitored

The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding Product features vehicle, pedestrian, or stock gate access control.

Features

  • 2,000 lbs holding force
  • Operates under preload up to 100lbs
  • Automatic dual voltage - no field adjustment required
  • Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
  • Self-aligning receiver (+/- 1/2 in. horizontally) helps compensate for gate misalignment and sag
  • Tamper resistant cast housing
  • Optional latch status monitor
  • Surface mount
  • MagnaCare lifetime replacement, no fault warranty

Item#:
GL1-FSM
You must be logged in to order this item. Log in here

ELECTRIC LATCH RETRACTION KIT - FALCON

Item#:
LR100FAK
You must be logged in to order this item. Log in here

1/2 Inch Spacer for 1200 lb. Lock

Item#:
AM6300
You must be logged in to order this item. Log in here

Electric door strike, 24VAC/DC Fail Locked. (dormakaba part

Item#:
DS-4114-08
You must be logged in to order this item. Log in here

ADDITIONAL HEADER PLATE 600 SI NGLE SERIES LOCKS CLEAR FINISH

Item#:
AM3330
You must be logged in to order this item. Log in here

Armature Housing for 1200LB Ma gnetic Lock

Item#:
CX-MA1212
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 11344 ▶ ▶|
View:
(Denotes required field.)