PFS3010-8ET-96 is a 8-port Fast Ethernet switch, which supports 250 meters long distance PoE transmission. It provides 8*10/100Mbps PoE ports and 2*1000Mbps uplink ports. The product is equipped with two transmission modes (Default/Extend), which are controlled by DIP switch

• Layer two commercial switch
• Supports IEEE802.3, IEEE802.3u and IEEE802.3X standards
• MAC auto learning, aging, MAC address capacity is 2K
• Supports MDI/MDIX self-adaptation
• RJ45 port supports 10/100/1000 Mbps self-adaptation
• Supports IEEE802.3af and IEEE803.3at power supply standards
• Adopts metal enclosure
• Supports Hi-PoE 60W
• Supports DC 48-57V power supply

You can easily deploy, monitor, and expand your surveillance system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network, and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance.

·         16 x 100 Mbps PoE Ports, 2 x Gigabit Combos Uplink

·         IEEE 802.3at/af PoE Ports

·         Network Topology Management, Alarm Push, Network Health Monitor

·         6 KV Surge Protection for PoE Ports

·         AF/AT Camera Can Reach up to 980 ft (300 m) in Extend Mode

The EE328 is a single unit IP Network and PoE repeater that requires very little installation time and absolutely no set up or configuration. Installation requires simply connecting the unit in line with the network run. The EE328 Ethernet repeater draws power from the PoE network switch and extends the power for the next 100 meters. If the network switch is not a PoE device the EE328 has an optional power input (PS48) and can also function as a PoE inserter in addition to extending the network communication signals. The EE328 is fully 802.3af compliant as a PoE source and device, it is ideal for extending network signals or network and PoE signals.
LED lights easily tell the status of network communication and PoE power. The EE328 requires no network setting to be changed or adjusted.
The EE328 extends and repeats network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The units are constructed of industrial grade RoHS compliant plated aluminium which is finished with corrosion resistant finish making it very durable.
Features

• Supports any network device, including IP cameras, Megapixel & 4K cameras
• Fully transparent to the network
• Easy to install, no set up required
• No MAC or IP addressing required
• Built-in Surge protection
• LED Indicators for Network signals, link status and power
• Optional power supply can insert PoE power for non-PoE switches
• Unit powered by PoE input or external power supply, passes PoE through
• Transmits data and PoE
• Can be daisy-chained for additional distance
• Transmits up to distances of 500 meters (1640 feet)
• Extends existing Ethernet Network 10/100 cable runs additional 100m/328ft
• Made in the U.S.A.

• Supports long distance PoE transmission up to 800m with ePoE technology of Dahua
• Layer-two web managed ePoE switch
• Port 1-8 support three self-adaptive transmission modes which are IEEE, E100 and E10
• Port 1-8 support both twisted-pair transmission and coaxial cable transmission
• Support web management: port management, 802.1Q VLAN, STP/RSTP, LACP, 802.1X, QoS
• Support PoE management, Green PoE, Legacy Support
• Conform IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards