|◀ ◀ 193 - 204 of 607 ▶ ▶|
View:

12VDC @ 10A, 2 OUT, FAI XL ENC arger w/Fire Alarm Disconnect

Item#:
EFLOW102NX
You must be logged in to order this item. Log in here

16CH EOC RCV PASS POE+ 100MBPS eiver. Transmits IP video/data

Item#:
EBRIDGE1600PCRM
You must be logged in to order this item. Log in here

EFLOW102NX PWR SPLY W/ACM8 ss power controller - 8 fused

Item#:
EFLOW102NA8
You must be logged in to order this item. Log in here

4OUT IP/COAX PASS POE/POE+ RCV iver. Transmits IP video/data

Item#:
EBRIDGE4PCRM
You must be logged in to order this item. Log in here

CCTV Power Supply, 16 Fused Outputs, 24/28VAC @ 8A, 115VAC, BC100 Enclosure

Model ALTV2416 provides 24VAC or 28VAC distributed via sixteen (16) fuse protected outputs. ALTV2416220 is a 220VAC Input version of this unit.

  • Secondary fuse rated @ 10A/250V.
  • AC power LED.
  • Power ON/OFF switch.
  • Spare fuses provided. (all models w/primary and/or secondary fuses).

Item#:
ALTV2416
You must be logged in to order this item. Log in here

24" JUMPER CABLE FOR LINQ2 ule

Item#:
LINQJ24
You must be logged in to order this item. Log in here

CCTV Power Supply, 8 Fused Outputs, 24VAC @ 12.5A, 115VAC, BC300 Enclosure, includes 3-wire line cord

ALTV248ULHI3 Isolated CCTV Power Supply provides 24VAC distributed via eight (8) isolated fuse protected power limited outputs for powering CCTV Cameras, heaters and other video accessories.
  • Input
    • 115VAC, 50/60Hz, 3A.
  • Output
    • Eight (8) fuse protected outputs.
    • 24VAC @ 12.5A (300VA) supply current.
    • Outputs are rated @ 3.5A.
    • Surge suppression.
  • Electrical:
    • Temperature:
      • Operating: 0° C to 49° C (32° F to 120° F).
      • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.): 154 BTU/Hr.
  • System AC input VA requirement: 345VA.
  • Features:
    • Illuminated master power disconnect circuit breaker with manual reset.
    • Unit maintains camera synchronization.
    • Spare fuses provided.
    • Factory installed 3-wire line cord.
Item#:
ALTV248ULHI3
You must be logged in to order this item. Log in here

EFLOW6NB & EFLOW104NB PWR SPLY is selectable for 12VDC or 24V

Item#:
MAXIMAL37FE
You must be logged in to order this item. Log in here

IP ACCESS FACP REC/TRANS KIT itates emergency egress withou

Item#:
ENTRADA2DMK
You must be logged in to order this item. Log in here

Industrial, 80W/48VDC

Item#:
HLG-80H-48 LIL
You must be logged in to order this item. Log in here

12/24VDC 2.5A W/PD8ULCB - 12VDC or 24VDC @ 2.5 amp, PT

Item#:
AL300ULPD8CB
You must be logged in to order this item. Log in here

EoC or Long Range Ethernet Single Port Transceiver, 100Mbps

Altronix eBridge100TM EoC hardened transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE/PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or endspan. The receiver passes PoE/PoE+ power over the same coax cable to the eBridge100TM transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 300m. When paired with the eBridge100RM EoC Receiver, the eBridge100TM will pass 100Mbps full duplex data and PoE/PoE+ over CAT5e (or higher) up to 500m

Item#:
EBRIDGE100TM
You must be logged in to order this item. Log in here
|◀ ◀ 193 - 204 of 607 ▶ ▶|
View:
(Denotes required field.)