Commercial Fire and Burg approved Wireless Receiver, supports 255 devices, max of (4) receivers supported by GEM-C system.

Features:

• Supports 64 wireless zones, 16 wireless keys
• Up to 8 receivers on one system

Features:

• PC4116 adds 16 hardwire zones
• AUX power rated at 250 mA (PTC protected)

The Model DX-12 1-Channel Metal Case Receiver is designed for use in security systems and remote switching functions. The receiver is housed in a heavy-duty metal case to ensure reliable operation without detuning when installed inside another metal housing. It can be used with the EXA-1000 or EXA-2000 remote antennas for improved range. Typical applications for the receiver include adding a wireless zone, a panic button, or creating a remote arm/disarm feature for a hardwired alarm panel. Each time a transmitter is triggered with a digital code matching the receivers digital code, the receivers relay will activate.

The Model DX-12 is compatible with standard digital transmitters only.

The output of the DX-12 receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receivers power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum.

Features:

• Metal housing
• Operates on 11-24 VDC or 12-16 VAC power
• One channel
• Standard digital format: 256 discrete codes
• One form C relay output
• One Amp contact rating @ 32 Volts AC/DC
• RF frequency: 303.875 MHz
• 5.5 in. W x 3.8 in. H x 1.5 in. D
• Order number: SNR00038

The GEM-RECV-XP8 will accommodate up to 8 wireless transmitters, 4 GEM-SMK wireless smoke detectors, and 4 GEM-KEYF key fob transmitters. The receiver is connected to the keypad 3-wire bus. The receiver monitors each transmitter, updating transmitter status as reports are received, and coveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, the panel will issue a Supervisory Failure system trouble.

The Model D-67F 1-Channel Alternating Relay Receiver is designed for use in security systems and remote switching functions. A typical application for the receiver is creating a remote arm/disarm feature for a hardwired alarm panel. When a transmitter is triggered with a digital code matching the receivers digital code, the receivers relay will latch. The next time a transmitter is triggered, the receivers relay will un-latch.

The Model D-67F is compatible with standard digital transmitters only.

The output of the D-67F receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receivers power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum.

Features:

• Operates on 11-24 VDC or 12-16 VAC power
• One channel
• Standard digital format: 256 discrete codes
• One form C relay output
• One Amp contact rating @ 32 Volts AC/DC
• Alternating relay output; transmit to latch, transmit to un-latch
• RF frequency: 303.875 MHz
• 4.9 in. W x 3.8 in. H x 1.3 in. D
• Order number: SNR00035

Provides (8) Open Collector PGM Outputs, Suitable for Commercial Fire and/or Burg Applications