|◀ 685 - 696 of 23863 ▶|
View:
You must be logged in to order this item. Log in here
Provides 3 zones of amplified speaker outputs with adjustable volume, along with 3 zones of microphone inputs. The M1TWA can be used to add two way listen-in to the M1 Control or to just add amplified speakers at keypads and other locations in a building. Each of the 3 amplified speaker zones can drive a maximum combined impedance range of ~4 to 32 Ohms, permitting multiple speakers to be connected. Each zone includes a mute option that is triggered via an output from the control. The 3 microphone zones can handle up to 4 individual microphones each.
  • 3 Amplified Speaker Zones 
  • Adjustable Speaker Volume Control by Zone 
  • Selectable Mute by Zone 
  • 3 Microphone Input Zones (up to 4 mics per zone) 
  • Selectable Mic Listen by Zone or Select ALL 
  • Interfaces to ELK-M1 or ELK-M1EZ8 Controls
  • Output Impedance Range: ~4 to 32 Ohms per SPKR Output Multiple speakers on any single output must be parallel or serial connected to maintain rated impedance 
  • Amplifier Rating: 1/2 Watt per Speaker Output 
  • Microphone Inputs: Up to 4 Mics per input. Compatible with: ELK-M1TWM, ELK-M1TWS 
  • Operating Voltage: 9 to 14 Volts D.C. 
  • Current Draw: 15mA nominal, 1000mA (1 Amp) maximum 
  • Microphone Current Draw. 5mA each 
  • Housing Dimensions: 4.25" x 6.375" x 2.125"
  • Circuit Board Dimensions: 2.25" x 3.95"
Item#:
M1TWA
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Extra rechargeable lithium battery pack for VOSKER V150 mobile security cameras. 

Avoid interrupting the surveillance of your property thanks to an additional battery that will allow you to quickly replace the battery in your VOSKER camera on site. 

  • Compatible with VOSKER V150 security camera 
  • Micro-USB Port 
  • Voltage: 3.7V 
  • Capacity: 10 000mAh 
Item#:
V-LIT-B2
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Adds up to three (3) zones of two way listen-in to M1 Gold Control. This can be used by the central Station to verify an alarm, or by a user from the telephone remote control to check on elderly parents, children, etc. Up to 12 microphones (M1TWS) may be connected. 
  • Interfaces Listen-in Microphones to the M1Gold 
  • Powers Microphones and Performs Switching 
  • Provides 3 Separate Microphone Zones 
  • Each Zone Can Have Up to 4 Microphones 
  • All Programming and Operation Is Performed from the M1 Control
  • Requires ELK-M1TWM or M1TWS Microphones 
  • Operating Voltage: 12 Volts D.C. 
  • M1TWI Board Current Draw: 10mA 
  • Microphone Current Draw. 5mA each 
  • Housing Dimensions: 4.375" x 3.0" x 1.125"
  • Circuit Board Dimensions: 3.5" x 2.75"
Item#:
M1TWI
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Altronix VR6 Voltage Regulator converts a 24VDC input into a regulated 5VDC or 12VDC selectable output at up to 6A supply curent. It reduces the cost of adding an additonal power supply to achieve 24VDC and 12VDC or 5VDC simultaneously. / Altronix PDS8CB dual input power distribution module is designed to steer the power from either two (2) low voltage AC or DC power sources. This power is distributed over a total of eight (8) PTC protected outputs.
VR6

  • Power Input / Output:
    • Input: 24VDC @ 1.75A  Output: 5VDC @ 6A.
    • Input: 24VDC @ 3.5A  Output: 12VDC @ 6A.
  • Output:
    • 5VDC or 12VDC regulated output.
    • Output rating 6A max. non power-limited.
    • Surge suppression.
  • LED Indicators:
    • Input and output LEDs.
  • BTU/Hr (approx.):
    • 5VDC: 15 BTU/Hr.
    • 12VDC: 37 BTU/Hr.
PDS8CB
  • Power Input 1 and Input 2 Voltage Range:
    • 5VDC to 24VDC up to 9A each or 16VAC to 28VAC up to 9A each.
  • Outputs:
    • Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2.
    • Individual outputs may be set to OFF position for servicing.
    • PTC protected outputs rated @ 2A. (total output current should not exceed max current rating of power supply employed).
    • Surge suppression.
  • LED Indicators:
    • Eight (8) individual output LEDs.

Item#:
PDS8CBK1
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 685 - 696 of 23863 ▶|
View:
(Denotes required field.)