|◀ 181 - 192 of 205 ▶|
View:
You must be logged in to order this item. Log in here
Compatibility
• Compatible with HS2016/ HS2032/ HS2064/ HS2128 control panels V1.1 and higher
• Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers (SG-System 5 required for Visual Verification)
Specifications
Dimensions .............. 5.875" W × 4.5” H (150mm × 115mm)
Weight........................................................ 0.683 lbs (310 g)
Current Draw............................................................ 150 mA
Operating Environment ............... 5° to 40° C (40° to 104° F)
Item#:
TL880LTVZ N
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The 2GIG-LTEV-A-GC3 is a 4G LTE radio for the Verizon network to work with Alarm.com. This new radio transfers both data and two-way voice over Verizons 100% LTE network and VoLTE (Voice over LTE) technology.
To enable the 2GIG-LTEV-A-GC3 radio, the GC3 Panel requires Firmware version 3.0.2 or newer.

Features

  • 4G LTE cellular telephone module
  • Works with Verizon Network
  • Compatible with Alarm.com
  • GC3 Requires FW v3.0.2 or newer
  • Includes LTE antennas already installed
  • Optional 2GIG-ANT5X attic antenna is available, if needed.
Item#:
2GIG-LTEV-A-GC3
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The tilt sensor is compatible with GC2 firmware revisions 1.14 and higher

The sensor (Model 2GIG-TILT1e-345) is designed for applications where the tilt status of an asset, such as a garage door, needs to be monitored. Other uses might include: mailbox doors, large pet doors, or hinged storm cellar doors. The tilt sensor communicates with the control panel using the 345 MHz frequency. Once the sensor is tilted to 45 degrees, the sensor will transmit to the panel. The sensor will also send a restore signal when the sensor it returned to less than 45 degrees.

The 2GIG-TILT1e-345 is equipped with a cover tamper switch and low battery monitoring. If the case of the Tilt Sensor is removed for any reason, the radio transmitter will send a tamper alert. Should the battery voltage drop below a prescribed level, the sensor will send a low battery report indicating that the battery should be replaced. The 2GIG-TILT1e-345 is compatible with GC2e firmware revisions 1.14 and higher. 


Features

  1. Encrypted Protocol for Enhanced Security
  2. Encrypted Wireless Tilt Sensor
  3. Sensor transmits alert when tipped 45° off vertical
  4. Restore signal sent when sensor returned to less than 45°
  5. Requires GC2e panel firmware revision 1.14 or higher
  6. Long life lithium battery included
  7. Screw, adhesive mount hw. included
Item#:
2GIG-TILT1E-345
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 181 - 192 of 205 ▶|
View:
(Denotes required field.)