CONTACTS,OVERHEAD DOOR

Compare

Thin Door/Window Contact, 345 MHz

The Thin Door/Window Contact is designed for use on doors, windows, and other objects that open and close. It communicates with the control panel using the 345 MHz frequency. When the magnet (which is mounted near the sensor) moves away from or closer to the door contacts sensor, signals are transmitted to the control panel.

The door contact also has an external input that accepts connections from normally-closed (NC) dry contact devices. For added protection, it is also equipped with a cover tamper.

Features:

For narrow applications, sensor is only 3/4in. wide

Fully supervised

Rare earth magnet

Supports internal and external contacts

Can be used for 2 zones of protection

Lithium battery

ETL listed

Item#:

2GIG-DW10-345

You must be logged in to order this item. Log in here

Compare

PowerG 915Mhz Wireless Door/Window Contact

The PowerG Wireless Commercial Magnetic Contact with Auxiliary Input is installed on common intrusions points such as windows and doors to provide perimeter protection of the premise. It’s designed for both residential and high-volume commercial use, ensuring superb performance over many years, with a long-lasting battery life. The PGX309 is designed to communicate with the security system to report openings and closings of doors & windows. Known for its versatility and reliability, the PGX309 is an easy to install device ideal for a wide range of environments. This contact is designed for quicker commercial installation which require multiple devices.

Long-lasting battery for commercial applications - Up to 5 years with typical commercial use under standard conditions
Superior PowerG transmission range, perfectly suited for very large properties
Auto-enrollment process by pulling a tab
Built-in link quality indicators eliminate the need for the installer to physically approach the control panel
Configurable auxiliary input provides the option to connect a standard hardwired device to a PowerG wireless system

Item#:

PG9309

You must be logged in to order this item. Log in here

Compare

Wireless Tilt Sensor

The sensor (Model 2GIG-TILT1-345) is designed for applications where the tilt status of an asset, such as a garage door, needs to be monitored. Other uses might include: mailbox doors, large pet doors, or hinged storm cellar doors. The tilt sensor communicates with the control panel using the 345 MHz frequency. Once the sensor is tilted to 45 degrees, the sensor will transmit to the panel. The sensor will also send a restore signal when the sensor it returned to less than 45 degrees.

The 2GIG-TILT1-345 is equipped with a cover tamper switch and low battery monitoring. If the case of the Tilt Sensor is removed for any reason, the radio transmitter will send a tamper alert. Should the battery voltage drop below a prescribed level, the sensor will send a low battery report indicating that the battery should be replaced. The 2GIG-TILT1-345 is compatible with GC2 firmware revisions 1.14 and higher.

Features:

Wireless Tilt Sensor

Sensor transmits alert when tipped 45° off vertical

Restore signal sent when sensor returned to less than 45°

Requires GC2 panel firmware revision 1.14 or higher

Long life lithium battery included

Screw, adhesive mount hw. included

Item#:

2GIG-TILT1-345

You must be logged in to order this item. Log in here