S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
- Adds up to 144 individual wireless zones (sensors/points)Â
- Operates from the 4 wire M1 RS485 Data BusÂ
- Additional Receivers (up to 11) may be connected to a single M1 or M1EZ8 Control for redundancy or greater coverageÂ
- Flash Memory for Updating of operating FirmwareÂ
- Sensitivity: >105 dbmÂ
- Operating Temperature: 0 to 120 degrees FÂ
- Operating Voltage: 12 Volts D.C.Â
- Current Draw: 70mAÂ
- Indoor Range: 300 to 500 ft. line of sight
- Add up to 32 high performance EchoStream wireless transmitters to any installation
- Includes support for both single and multiple condition transmitters
- Two line text display shows condition of each transmitter, provides log of past events, and displays signal strength
- Outputs can be configured in follower, latching, momentary, or toggle modes independently
- Case tamper protection, jam detection, and internal antennas for a secure wireless implementation
- Wireless programming routine built into the receiver
- Includes support for both single and multiple condition transmitters
The GEM-K4RF is a multi-segment LCD digital keypad that is compatible with the NAPCO GEM-Series GEM-P816, P1632, P3200 & P9600 control panels.
Features:
The Inovonics four zone add-on receiver with relay outputs programs and supervises up to four Inovonics transmitters. This receiver includes Form C relays for each output, allowing connection to any hardwire panel, or stand-alone wireless application.
Features:
- Add up to four high performance EchoStream wireless transmitters to any installation
- LED allows the user to view the current status of all four transmitters
- Five form C relays for connecting to any panel: four alarm, one fault
- Outputs can be configured in follower, latching, momentary, or toggle modes independently
- Case tamper protection, jam detection, and internal antennas for a secure wireless implementation
- Wireless programming routine built into the receiver
The Inovonics 16 zone multi-condition receiver with relay outputs programs and supervises up to 16 single or multiple condition transmitters. This receiver includes Form C relays for each output, allowing connection to any hardwire panel, or stand-alone wireless application.
Features:
- Add up to 16 high performance EchoStream wireless transmitters to any installation
- Includes support for both single and multiple condition transmitters
- Two line text display shows condition of each transmitter, provides log of past events, and displays signal strength
- Six form C relays for connecting to any panel
- Outputs can be configured in follower, latching, momentary, or toggle modes independently
- Case tamper protection, jam detection, and internal antennas for a secure wireless implementation
- Wireless programming routine built into the receiver
GEM-RECV32 will accommodate up to 32 wireless zones. The receiver is connected to the control panel's 4-wire bus. The receiver monitors each transmitter, updating transmitter status as reports are received, and conveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, a Supervisory Failure will result.
Features:
- Supports up to 128 wireless zones and 32 wireless keys varies per panel
- Supports DSC PowerG devices
- Compatible with PowerG Repeater (PG9920) for range extension
- All wireless detectors are fully supervised for communication integrity
- Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 StandardÂ
GEM-RECV96 will accommodate up to 96 wireless zones. The receiver is connected to the control panel's 4-wire bus. The receiver monitors each transmitter, updating transmitter status as reports are received, and conveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, a Supervisory Failure will result.