The GEM-K4RF is a multi-segment LCD digital keypad that is compatible with the NAPCO GEM-Series GEM-P816, P1632, P3200 & P9600 control panels.

Features:

• Large backlit, fixed English display
• Built-in 32 Point Gemini wireless receiver for labor-saving convenience
• Proven crystal-control wireless performance
• Supports all Gemini transmitters
• New stay & away ease-of-use buttons, for easy one button arm
• EZ-Programming mode
• New intuitive, stay & away ease-of-use buttons, for easy one button arm and easy "instant" (hold-down)
• Large soft touch backlit keys with tone
• Backlit displays for easy reading
• Wireless transmitter signal strength indication
• Decor friendly soft white design
• Fire, police and auxiliary programmable panic keys
• Fingertip reference chart

Features:

• Supports up to 128 wireless zones and 32 wireless keys  varies per panel
• Supports DSC PowerG devices
• Compatible with PowerG Repeater (PG9920) for range extension
• All wireless detectors are fully supervised for communication integrity
• Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard 

GEM-RECV96 will accommodate up to 96 wireless zones. The receiver is connected to the control panel's 4-wire bus. The receiver monitors each transmitter, updating transmitter status as reports are received, and conveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, a Supervisory Failure will result.

The Inovonics 16 zone multi-condition receiver with relay outputs programs and supervises up to 16 single or multiple condition transmitters. This receiver includes Form C relays for each output, allowing connection to any hardwire panel, or stand-alone wireless application.

Features:

• Add up to 16 high performance EchoStream wireless transmitters to any installation
• Includes support for both single and multiple condition transmitters
• Two line text display shows condition of each transmitter, provides log of past events, and displays signal strength
• Six form C relays for connecting to any panel
• Outputs can be configured in follower, latching, momentary, or toggle modes independently
• Case tamper protection, jam detection, and internal antennas for a secure wireless implementation
• Wireless programming routine built into the receiver

GEM-RECV32 will accommodate up to 32 wireless zones. The receiver is connected to the control panel's 4-wire bus. The receiver monitors each transmitter, updating transmitter status as reports are received, and conveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, a Supervisory Failure will result.

Features

• Repeats 2GIG and Honeywell signals on 345MHz frequency
• 24-hour backup battery included
• Repeat indicator in the signal eliminates “repeated signal storm”
• Optional zone programming to supervise Tamper, AC Loss, and Low Battery

• 1,100 Users over 2 Outputs. Codes may be 4~8 digits: - Output #1  Form C relay, 1A@30VDC, 1,000 users - Output #2  Form C relay, 1A@30VDC, 100 users
• Outputs can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
• Super user code gives admin access to keypad
• Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
• Programmable egress input with optional warning alarm and delayed egress
• Real-time clock to auto-disable access at specific times
• Up to 50 (01~50) duress codes for output #1 and 10 (01~10) for output #2
• Duress code signals a silent alarm if an authorized user is forced to open the door under duress
• 12~24 VDC/VAC Auto-adjusting operation
• All features are programmed directly from the keypad: No need for an external programmer
• IP66 Weatherproof Rating
• Mounts to a standard single-gang back box (surface-mount back box included)
• Durable and attractive stainless steel faceplate
• Tamper output: N.C. Dry contact, 50mA@24VDC max.
• Keypad illuminates when a button is pressed; backlight can be programmed for FULL, AUTO, or OFF in standby mode
• Mantrap: for a protected area with two doors, this feature allows only one door to be open at a time
• Door sensor input for anti-tailgating operation
• Door-propped-open warning
• Door-forced-open warning
• EEPROM Memory protects programmed information in case of power loss

• Up to 1,000 possible user codes (4-8 digits)
• Output: Form C relay, 1A@30VDC max.
• Output can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
• Up to 50 (01~50) possible temporary visitor codes, which can be programmed for onetime or limited-time use (1~99 hours)
• Durable and attractive stainless-steel faceplate
• Programmable delayed egress input lets users exit the premises without keying in the code
• EEPROM Memory protects programmed information in case of power loss
• 12~24 VDC/VAC Auto-adjusting operation
• Tamper output: N.C. Dry contact, 50mA@24VDC max.
• Mounts to a standard single-gang back box (surface-mount back box included)
• Programmable wrong-code lockout
• Real-time clock to auto-disable access at specific times
• All features are programmed directly from the keypad: No need for an external programmer