The WS4985 Flood Detector is a wireless detector designed to work with the Alexor Wireless Panel as well as DSC 1-Way Wireless Receivers (see Compatibility List for further details). The WS4985 Flood Detector senses the presence of water in basements, laundry rooms, bathrooms, kitchen and numerous other areas where water may leak or flood, prompting advance warning of potential flooding.

The WS4985 is a 1-way wireless transmitter consisting of a probe connected to a wireless transmitter via a 6-foot (1.82 m) wire. The transmitter is installed at a higher level on the wall with the probe located at floor level or a desired height. In the event that there is a water leak, the probe will detect the moisture and deliver the information to the transmitter on the wall. The transmitter then sends the signal to either the Alexor Wireless Panel or DSC 1-Way Wireless Receivers to trigger the alarm. It is important to note that although the probe is sensitive, it has been designed to be immune to false triggers such as floor mopping, because the sensor head is recessed into the probes housing.

If the WS4985 is ever damaged or tampered with perhaps if the wire between the transmitter and the probe is cut), its trouble status will immediately signal the Alexor or DSC 1-Way Wireless Receivers and the device will instantly notify the alarm system. The detector also communicates low battery issues

Features:

• Based on WS4945 wireless door/window contact
• Water probe through a (1.8 m )6 foot-wire
• Fully supervised
• Built-in reed switch
• Normally closed external contact input
• 1 lithium battery included
• Case and wall tamper
• End-of-line resistor
• 4 year battery life

The Panic Button Remote is a compact, battery powered, wireless panic button that transmits an Emergency signal from any location within radio frequency (RF) range of the control panel. The signal can be transmitted to the control panel, whether the security system is armed or disarmed.

Features:

• For triggering emergency alarm
• Dimensions: 1.65 x 1.20 x 0.50 in. (LxWxD)
• Weight: 0.45 oz. (including battery)
• 5-second button lockout
• Lithium battery with 3 years life
• Completely water resistant
• Completely supervisable
• Mounting options: lanyard, wristband, wall mount, belt clip, car-visor clip

• Quick peel and press mounting
• Small profile for a near invisible look
• Most flexible magnet positioning in the industry
• Strip & Stick external contact holes
• 5 year warranty

The Super Switch is 2GIGs wireless takeover module. This unit was designed to convert 8 hardwired zones into eight wireless zones, make installation simple, and work with existing 12volt control panels. The module is to be mounted next to the existing Control Panel where the hardwired zones are connected. All of the zones on the Super Switch act as supervised wireless zones.

Features:

• Converts hardwired loops into as many as 8 wireless zones
• Converts 8 zones per module (additional modules may be added)
• Operates at 9-16 VDC, 50 mA
• Can be powered by and use backup battery of an existing 3rd party Control Panel
• ETL Listed

Features

• Durable, scratch-resistant buttons
• 4 programmable function keys
• Long-life lithium batteries included
• Full 3-second delay on panic alarm to reduce false alarms
• Multifunction belt clip included
• Reliable 433 MHz technology
• Optional generic rubber insert included
• Water resistant