|◀ 49 - 60 of 456 ▶|
View:
You must be logged in to order this item. Log in here
The PowerG Wireless Smoke and Heat Detector provides early warning of fire. It alerts occupants of the room by activating the built-in 85db alarm buzzer and flashing LED light when smoke or temperature exceeding 57°C (135°F) are detected.Ā At the same time, it transmits a coded signal to the control panel to activate the system siren, alerting the end user and/or central monitoring station to send onsite assistance.
  • Provides accurate early fire warning, with audio and visual alerts, when smoke or high temperature is detected
  • Enhances safety and facilitates maintenance, with alerts for device tampering and low battery
  • Robust industry leading PowerG commercial grade wireless technology
  • Offers long-lasting value with a 3-year battery life (with typical use)
  • Large transmission range enables repeater-free installations
  • Speeds up installations with visible link quality indicator on the device
  • Simple wall or ceiling installation, with bracket
  • Protected by a back tamper
Item#:
PG9936
You must be logged in to order this item. Log in here
The ELK-319HRR is a Supervised, Wireless Heat Sensor. It uses a solid-state thermistor to sample and trigger an event at a selectable setpoint of either 135 or 200 degrees F. It can also trigger an event if the temperature rises 12 degrees F or more during a one (1) minute time period.
This sensor is compatible with Elk's 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
  • Ideal for garages, kitchens, attics, utility closets, etc.
  • Long range and battery life
  • Transmits alarm, tamper, low battery, and supervisory signals
  • Powered by a single CR123 battery
  • RF frequency: 319.5 MHz
  • Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
  • Battery type: One (1) 3VDC lithium battery
  • Dimensions: 2.29" Dia. x 1.28" H (58.25mm x 32.4mm)
Item#:
319HRR
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

A bulky home security system can be an eyesore. Adding to that stress is hard wire installation permanently altering the aesthetics of a room, door or window treatment. With its wireless connectivity and fully concealed platform, however, the Ion Security Plunger is a door security sensor that finally eliminates these pesky inconveniences.

Features:

  • Dimensions: 0.33 in. deep x 0.75 in. diameter
  • Fully concealed in wood door frame
  • Compatible with all DSC, GE, HAI and 2GIG Wireless receivers
  • 500 ft open air wireless transmit range
  • Long-life Battery  5+ years (avg)

Item#:
PLUNGER-2GIG
You must be logged in to order this item. Log in here

The 2GIG-FT1-345 is a fully supervised, tamper protected one-way 345 MHz sensor. It will monitor the ambient temperature and will detect a wet/dry flood condition. The sensor reports wet/dry conditions and temperature to the panel.

Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.

Features:

  • Detects standing water that reaches the sensor probe and notifies the panel
  • Sends trouble alert to the panel when the ambient temperature exceeds 84 deg. F
  • Sends trouble alert to the panel when the ambient temperature falls below 42 deg. F
  • Ships with long life lithium battery life (typical battery life of 5 years)
  • ETL listed
  • Requires Firmware Version 1.14 or later for GC2 panel and 3.1 or later for GC3

Item#:
2GIG-FT1-345
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The PG9901 Wireless PowerG Indoor Siren is a fully supervised, cost effective siren that provides differentiated audible and visual alerts in the case of fire, carbon monoxide, burglary and flood events. In addition to providing a loud audible alert, the PG9901 also contains a built-in high-power white strobe light providing a visual alert of the event.
With its sleek and modern design, the PG9901 will fit most internal spaces.
Features:

  • Visible link quality indicator on device
  • 110dB Siren with Strobe Light
  • Differentiated audible alerts for intrusion and fire
  • Prolonged battery life (8 years with typical use)
  • Dimensions: 161 x 161 x 50mm (6.44 x 6.44 x 1.75in)
Item#:
PG9901 BATT
You must be logged in to order this item. Log in here
  • For sensing things that open or separate
  • 3 total zones. Each with separate ESNs
  • Main reed switch + magnet
  • 2 supplemental hardwire zones
  • Outer terminal
  • Inner terminal
  • Cover tamper
  • Strong, reliable RF signal
  • 10-15 year battery life on CR123A battery
  • Low Battery indication
Item#:
RE301
You must be logged in to order this item. Log in here

The IQ Siren is the perfect way to make your alarm even LOUDER when the alarm goes off. Completely wireless it plugs into any standard outlet and even includes 3 LED lights that strobe during alarm events. Acting as a Z-Wave repeater, it strengthens and improves your smarthome network improving the performance of all your devices.
Features:

  • Plugs into any standard outlet
  • 3 LEDs strobe during alarm events
  • Clean, discreet look
  • 3 hour backup battery
  • Acts as Z-Wave repeater to strengthen your home network
Specifications:
  • Built-in Lithium Battery: 430 mAh
  • Alarm Power: 1.7W
  • Max Standby Power: 0.7W
  • Max Volume: 105dB
  • Operating Temperature: 0°C to 45°C
  • Operating Distance: Up to 550 feet outdoors
  • Frequency Type: Z-Wave Plus


Item#:
QZ2300-840
You must be logged in to order this item. Log in here
The ELK-319DWM is a Supervised, Wireless Door Sensor that detects the opening and closing of doors or windows.
This sensor is compatible with Elk's 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
  • Small, low profile design
  • Long range and battery life
  • Transmits open/close, tamper, low battery, and supervisory signals
  • Uses easy to find CR2032 batteries
  • RF frequency: 319.5 MHz
  • Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
  • Battery type: Two (2) CR2032 3VDC lithium coin-cellĀ 
  • Operating Temp Range: 32 to 120°F (0 to 49°C)
  • Dimensions 2.25" L x .1.0 x 0.50" in. (L x W x D)
Item#:
319DWM
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 49 - 60 of 456 ▶|
View:
(Denotes required field.)