S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The IQ Mini DW sensor is a powerfully small device that can be placed on anything that opens or closes. With double batteries up to 8-10 year battery life, a rare earth magnet for more flexibility when installing on tricky moulding or other openings, and a raised antenna that allows you to install on metal, plastic, or wood without signal interference. Create automation rules like "turn on light when door is opened" or "Adjust thermostat if window left open".
- Can be easily mounted on doors or windows with included adhesive
- Alerts IQ Panel if moved more than 1"
- Can be programmed as "Safety Sensor" for medicine cabinets, chemical storage, safes or storage closets
- Using Alarm.com you can get a text if your door or window is left open
- Create automation rules like "turn on light when door is opened" or "adjust thermostat if window left open"
- Requires two (2) 3V CR2032 Batteries
- The built-in tamper switch triggers an alert if the cover is removed
- Create custom names for each sensor, determine unique chime type, choose voice prompts on or off
- Sensor: 2.25"H x 1"W x .5"D
- Wireless signal range: 600ft (200M), open air.
- Code outputs: tamper, tamper restore, alarm, alarm restore, low battery.
- Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes.
- RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V Lithium (x2).
Item#:
QS1116-840
You must be logged in to order this item.
Log in here
PINPad is a small keypad featuring 1-button arming with a secure, 4-digit disarm code. PINPad can be wall-mounted, attached to a car visor, or carried in a purse or backpack.
- Secure, 4-10-digit code to disarm
- 1-button arming
- Mounts on wall via VHB tape
- Option to use as primary or backup-keypad device
- LED indicator
- Reversible backplate for wall or table top mounting
Item#:
RE652
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
This universal sensor has 1 built-in reed switch plus 2 external zone inputs (open or closed circuit) which allows it to secure up to 3 doors, windows, etc. It also features Elk's industry leading two-way technology.
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- Zones: Built-in reed, IN1, and IN3 (closed circuit terminals)
- Front and back tamper option
- 902 Mhz - 928 Mhz frequency hopping
- Maximum operating gap of reed: 1/2"
- 3V CR123A lithium battery
- Battery Life: 7 years typical
- Size: 1.5" W x 3" L x .9" D, Magnet: .57" W x 1.5" L x .6" D
Item#:
6022
You must be logged in to order this item.
Log in here
Edwards 88 Series Transformers provide low voltage source from 50 to 250 volt amps for all large signaling installations. Holes provided in transformer housing for surface mounting.The Edwards 88 Series heavy duty transformers are for heavy duty industrial and commercial applications.
Features:
Item#:
88-50
You must be logged in to order this item.
Log in here
This slim wireless door & window sensor is ideal for door and window applications and features Elk's industry leading two-way technology.
Includes:
- Slimline Door/Window Wireless Sensor
- Magnet
- Replaceable 3.6V Lithium battery
- Tamper Switch
- 4 #4 x ½" Flat Head Sheet Metal Screws
- Double Sided Tape for both transmitter and magnet
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- One built-in reed switch
- Front and back tamper option
- 902 Mhz - 928 Mhz frequency hopping
- Maximum operating gap of reed: 1/2"
- 3.6V ER14250 lithium battery
- Battery Life: 7 years typical
- Size: .71 in W x 3.4 in. L x .8 in. D, Magnet: .57 in. W x 1.5 in. L x .6 in. D
Item#:
6020
You must be logged in to order this item.
Log in here
The ELK-6032 All Environment PIR Motion Sensor combines the Optex VXI-R battery operated PIR detector with ELK’s advanced Two-Way Wireless technology for M1 Controls.
When the PIR sensor detects a violation, the two-way radio transmitter will transmit that event to the ELK Two-Way Wireless transceiver. Each signal sent from the sensor is acknowledged by the transceiver. This is to ensure that all messages are delivered, and it helps make the sensor energy efficient by not having to waste energy repeating any transmissions unless they have not been acknowledged.
The 6032 includes a battery saver timer designed to extend the life of the battery. This timer can be set for 5 sec. or 120 sec. Upon an initial violation, the sensor will activate the transmitter and start the timer. No additional activations will be detected or transmitted while this timer is running.
- Delivers stable and dependable detection even in severe outdoor environments
- Dual PIR Detection
- Adjustable Sensitivity and Range
- Adjustable Battery Saver Timer
- Two-Way wireless communicatons for reliable operation and extended battery life
- Transmits tamper and low battery troubles
- Coverage: Up to 12m (40ft.) by 90° with flexible detection pattern adjustable to 5 range settings
- IP Code: IP55
- Frequency: 902 - 928 Mhz channel hopping
- Power Input: 3.0 VDC
- Operating Voltage: 2.5 to 10 VDC
- Battery Type & Size: 2 x Lithium CR123A (supplied)
- Standby (Quiescent) Current Draw including sensor: ~12μA
- Current Draw: Max. ~6mA (Walktest, LED on, Transmitting)
- Operating Temperature Range: -4 to 140°F (-20 to 60°C)
Item#:
6032
You must be logged in to order this item.
Log in here
The ELK-6011 Single Button Panic Sensor has a stylish new look and now has a replaceable battery! It features a Single press and hold button and Red LED feedback indicator. The typical application for this sensor is for activating a panic or emergency alarm.
Includes:
- ELK-6011 Panic Button
- 3V Lithium Coin Cell Battery
- 30 inch Clear Plastic Lanyard
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- Single press and hold button and red LED feedback indicator
- Water resistant lanyard included
- 902 Mhz - 928 Mhz frequency hopping
- Size: 1.50 in. W x 2.32 in. L x .50 in. D
- Battery: CR2032 Lithium Coin Cell
Item#:
6011
You must be logged in to order this item.
Log in here
The ELK-6023 Wireless Recessed Door Sensor is the ultimate wireless security device for discriminating customers. It mounts into a 3/4in. drilled hole in a wooden door jamb and becomes nearly invisible once the door is closed. It features Elk's Industry Leading Two-Way Technology with positive signal acknowledgment, extended range, and long battery life.
| Includes: |
- Wireless Recessed Door Sensor
- Magnet
- Replaceable 3.6V Lithium battery
- 2 #4 x .5 in. Flat Head Sheet Metal Screws
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceiver
- Designed for wood and vinyl doors only
- Built-in tamper switch
- Frequency: 902 Mhz - 928 Mhz frequency hopping
- Dimensions: .75in. D x 2.5in. L Mag: .75in. D x .625in. L
- Maximum Operating Gap: 3/4 in.
- Battery: 3.6V Lithium 1/2 AA size
- Tamper Switch: Circuit Board Cover
Item#:
6023
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)