S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Works with the M1 control along with the ELK-M1XRFTW Two-Way Wireless Transceiver. Intended to be used in residential and light commercial installations, the PIR incorporates advanced features designed to ensure reliability, ease of installation, and provide innovative security enhancements.
To simplify installation, ELK's Wireless PIR Motion Sensor allows the installer to remotely enable/disable Walk Test Mode from a keypad. Until now, the industry has accepted the process of manually tripping a switch on a one-way wireless PIR to enter walk test mode. The bright high-intensity white LED convenience/security light clearly identifies when the sensor is detecting motion.
Includes:
- Wireless PIR Sensor
- 2 Replaceable 3V Lithium battery
- Standard Swivel Bracket and Locking Disc
- Blanking Plug
- 2 Plastic Anchors
- 2 #6 Pan Head Sheet Metal Screws
- Plastite #3 x ¼ in. screw
- #4 x 3/8 in. Pan Head Sheet Metal screw
- Instructions
- Ease of installation with keypad initiated walk test
- Industry First Security/Convenience Bright White LED with:
- Momentary motion activation during walk test mode
- Flashing during audible alarm activation
- Programmable "on" activation through M1 Rules
- Illuminate an area for camera assistance during event
- Temporary night path lighting
- Long battery life and 2 selectable sleep mode durations
- Can be easily mounted on doors or windows with included adhesive
- Alerts IQ Panel if moved more than 1"
- Can be programmed as "Safety Sensor" for medicine cabinets, chemical storage, safes or storage closets
- Using Alarm.com you can get a text if your door or window is left open
- Create automation rules like "turn on light when door is opened" or "adjust thermostat if window left open"
- Requires two (2) 3V CR2032 Batteries
- The built-in tamper switch triggers an alert if the cover is removed
- Create custom names for each sensor, determine unique chime type, choose voice prompts on or off
- Sensor: 2.25"H x 1"W x .5"D
- Wireless signal range: 600ft (200M), open air.
- Code outputs: tamper, tamper restore, alarm, alarm restore, low battery.
- Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes.
- RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V Lithium (x2).
The ELK-6040 Wireless Glass Break Sensor is designed for use with Elk's two-way wireless product line consisting of the ELK-M1XRFTW Transceiver and the ELK-M1 Control.
The 6040 listens for actual patterns of breaking glass across the full audio band using Pattern Recognition Technology. The factory set recognition patterns make it possible to detect the difference between breaking glass of framed perimeter windows in a building vs. a drinking glass breaking within a room.
Includes:
- Wireless Glass Break Sensor
- Replaceable 3V Lithium battery
- 2 Plastic Anchors
- 2 #6 Pan Head Sheet Metal Screws
- Instructions
- Pattern Recognition Technology
- Wireless two-way communication
- Operation Alarm LED - RED (viewable from front)
- RF Acknowledge LED - Bi-Color (viewable with cover off)
- Long life Lithium battery {supplied}
- Low battery trouble signal
- Dimensions: 4.25in. W x 3.13in. H x 1.70in. D
- Sensor: Omni-directional Microphone, 360° Detection Range
- Detection Range: 20 ft. (6m) x 360°
- Min. Distance from Glass: 4 ft. (1.2m)
- Glass Thickness:
- Plate 3/32 to 1/4 in. (2.4 to 6.4mm)
- Tempered 1/8 to 1/4 in. (3.2 to 6.4mm)
- Wired 1/4 in. (6.4mm)
- Laminated 1/8 to 1/4 in. (3.2 to 6.4mm)
- Power: One CR123 3.0 VDC Lithium Bttery
- Typical Battery Life: 5 years
- Secure, 4-10-digit code to disarm
- 1-button arming
- Mounts on wall via VHB tape
- Option to use as primary or backup-keypad device
- LED indicator
- Reversible backplate for wall or table top mounting
S2K Administration - Form Template Display
Actions