The WT4901 Wireless Indoor Siren is a fully supervised wireless siren designed to work with the Alexor Wireless Panel. With its sleek and modern design, the WT4901 will fit most internal spaces and is unobtrusive to the home environment. Since Alexor is mounted in a secure (but sometimes remote) location within the home, audible indications, via Alexor's onboard siren, regarding alarm triggers or smoke/fire detection may be quieter than what the WT4901 provides. And an indoor siren provides an alert to potential danger before a person moves too far into the home. With its powerful sounder, the WT4901 will annunciate these issues from its remote location but will not indicate the location of the control panel. The WT4901 also distinguishes between burglar and fire alarm by emitting different sounds for each and indicates entry and exit delays, trouble beeps and uses multiple door chimes.

Since the WT4901 is wireless, it can be installed in numerous locations inside the home. And because its wireless, installation time is quick with fewer holes to drill meaning mess-free installs and more installs throughout the day.

The WT4901 offers 2-Way wireless and continuously supervised communication with the Alexor Wireless Panel. The signals between the WT4901 and the panel are fully encrypted, prohibiting unauthorized interruption of communication between the two. If the WT4901 is tampered with, Alexor will immediately be signaled and the appropriate transmission will instantly be transmitted to the monitoring station. Additionally, one of the other sirens (either indoor or outdoor or Alexor's onboard siren itself) installed on the system will make up for the absence of the WT4901. Up to four sirens can be installed on the Alexor Wireless Panel.

Features:

• Siren Output  85dB
• Siren sounds for alarms, door chimes, entry/exit delay and troubles
• Transmits RF status, low battery and tamper condition
• Front and back tamper detection
• Nominal battery life - 1 year
• Compatible with IMPASSA 433MHz
• Onboard test button

The WS4985 Flood Detector is a wireless detector designed to work with the Alexor Wireless Panel as well as DSC 1-Way Wireless Receivers (see Compatibility List for further details). The WS4985 Flood Detector senses the presence of water in basements, laundry rooms, bathrooms, kitchen and numerous other areas where water may leak or flood, prompting advance warning of potential flooding.

The WS4985 is a 1-way wireless transmitter consisting of a probe connected to a wireless transmitter via a 6-foot (1.82 m) wire. The transmitter is installed at a higher level on the wall with the probe located at floor level or a desired height. In the event that there is a water leak, the probe will detect the moisture and deliver the information to the transmitter on the wall. The transmitter then sends the signal to either the Alexor Wireless Panel or DSC 1-Way Wireless Receivers to trigger the alarm. It is important to note that although the probe is sensitive, it has been designed to be immune to false triggers such as floor mopping, because the sensor head is recessed into the probes housing.

If the WS4985 is ever damaged or tampered with perhaps if the wire between the transmitter and the probe is cut), its trouble status will immediately signal the Alexor or DSC 1-Way Wireless Receivers and the device will instantly notify the alarm system. The detector also communicates low battery issues

Features:

• Based on WS4945 wireless door/window contact
• Water probe through a (1.8 m )6 foot-wire
• Fully supervised
• Built-in reed switch
• Normally closed external contact input
• 1 lithium battery included
• Case and wall tamper
• End-of-line resistor
• 4 year battery life