|◀ 109 - 120 of 466 ▶|
View:
The PowerG Wireless Smoke and Heat Detector provides early warning of fire. It alerts occupants of the room by activating the built-in 85db alarm buzzer and flashing LED light when smoke or temperature exceeding 57°C (135°F) are detected. At the same time, it transmits a coded signal to the control panel to activate the system siren, alerting the end user and/or central monitoring station to send onsite assistance.
  • Provides accurate early fire warning, with audio and visual alerts, when smoke or high temperature is detected
  • Enhances safety and facilitates maintenance, with alerts for device tampering and low battery
  • Robust industry leading PowerG commercial grade wireless technology
  • Offers long-lasting value with a 3-year battery life (with typical use)
  • Large transmission range enables repeater-free installations
  • Speeds up installations with visible link quality indicator on the device
  • Simple wall or ceiling installation, with bracket
  • Protected by a back tamper
Item#:
PG9936
You must be logged in to order this item. Log in here
The ELK-319HRR is a Supervised, Wireless Heat Sensor. It uses a solid-state thermistor to sample and trigger an event at a selectable setpoint of either 135 or 200 degrees F. It can also trigger an event if the temperature rises 12 degrees F or more during a one (1) minute time period.
This sensor is compatible with Elk's 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
  • Ideal for garages, kitchens, attics, utility closets, etc.
  • Long range and battery life
  • Transmits alarm, tamper, low battery, and supervisory signals
  • Powered by a single CR123 battery
  • RF frequency: 319.5 MHz
  • Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
  • Battery type: One (1) 3VDC lithium battery
  • Dimensions: 2.29" Dia. x 1.28" H (58.25mm x 32.4mm)
Item#:
319HRR
You must be logged in to order this item. Log in here
The ELK-319DG is a Supervised, Wireless Sensor uniquely designed for outdoor use on swing gates or doors. The sensor and magnet can be mounted using screws (included), pipe strap style clamps, or plastic wire ties. 
This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
  • All weather design
  • Ideal for pool areas and other outdoor gated spaces
  • Long range and battery life
  • Transmits open/close, tamper, low battery, and supervisory signals
  • Uses easy to find CR2032 batteries
  • RF frequency: 319.5 MHz
  • Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
  • Battery type: Two (2) CR2032 3VDC lithium coin-cell 
  • Operating Temp Range: -40 to 140°F (-40 to 60°C)
  • Dimensions: Sensor 3.39" L x 1.34" W x 0.79" D, Magnet 2.36" L x 0.83" W x 0.8" D
Item#:
319DG
You must be logged in to order this item. Log in here

A bulky home security system can be an eyesore. Adding to that stress is hard wire installation permanently altering the aesthetics of a room, door or window treatment. With its wireless connectivity and fully concealed platform, however, the Ion Security Plunger is a door security sensor that finally eliminates these pesky inconveniences.

Features:

  • Dimensions: 0.33 in. deep x 0.75 in. diameter
  • Fully concealed in wood door frame
  • Compatible with all DSC, GE, HAI and 2GIG Wireless receivers
  • 500 ft open air wireless transmit range
  • Long-life Battery  5+ years (avg)

Item#:
PLUNGER-2GIG
You must be logged in to order this item. Log in here

The 2GIG-FT1-345 is a fully supervised, tamper protected one-way 345 MHz sensor. It will monitor the ambient temperature and will detect a wet/dry flood condition. The sensor reports wet/dry conditions and temperature to the panel.

Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.

Features:

  • Detects standing water that reaches the sensor probe and notifies the panel
  • Sends trouble alert to the panel when the ambient temperature exceeds 84 deg. F
  • Sends trouble alert to the panel when the ambient temperature falls below 42 deg. F
  • Ships with long life lithium battery life (typical battery life of 5 years)
  • ETL listed
  • Requires Firmware Version 1.14 or later for GC2 panel and 3.1 or later for GC3

Item#:
2GIG-FT1-345
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Reduce the risk of takeovers with eSeries Encrypted technology.

The 2GIG Encrypted Recessed Door Contact is the industry’s most flexible supervised door contact. It communicates with the 2GIG Control Panel using the 345 MHz wireless frequency. It also allows a multitude of applications while hiding the transmitter within a door or window frame.

Features

  • Encrypted Protocol for Enhanced Security
  • Recessed Door Contact
  • Compact size, only 2-1/2″ long
  • Fully supervised
  • Rare earth magnet
  • Lithium battery
  • ETL listed
Item#:
2GIG-DW20E-345
You must be logged in to order this item. Log in here
  • Tactile button click and LED blink for feedback.
  • Recessed buttons for no “pocket false alarms”.
  • Full pivoting built-in key ring tangle-free storage.
  • Strong, reliable RF signal.
  • 4-6 year battery life, on A27 battery.
  • 2.5 x 1.3 x 0.55 inches.
Item#:
RE600-5
You must be logged in to order this item. Log in here

The IQ Mini-S is an ultra compact encrypted sensor that securely connects to the IQ Panel 2. Using our proprietary S-Line encryption technology, encrypts signals sent to the IQ Panel while still providing backwards compatibility for legacy 319.5 systems. Easy to install on anything that opens or closes, the IQ Mini-S can provide intelligent notifications like "door left open" can be custom named, and can even support Smart home rules like "when door opens, turn on light" or "when door left open adjust thermostat to save energy." Boasting up to eight years of battery life, the IQ Mini-S uses an innovative board and antenna design to extend range and allow mounting on a variety of surfaces. The IQ Mini-S also includes a rare earth magnet for flexible mounting options in a variety of situations.

  • Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
  • Can be easily mounted on doors or windows with included adhesive
  • Alerts IQ Panel if moved more than 1 inch
  • Can be programmed as Safety Sensor for medicine cabinets, chemical storage, safes or storage closets
  • Using Alarm.com you can get a text if your door or window is left open
  • Create automation rules like turn on light when door is opened or adjust thermostat if window left open
  • Requires two (2) 3V CR2032 Batteries
  • The built-in tamper switch triggers an alert if the cover is removed
  • Create custom names for each sensor, determine unique chime type, choose voice prompts on or off

Item#:
QS1135-840
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 109 - 120 of 466 ▶|
View:
(Denotes required field.)