S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Compatible with HS2016, HS2032, HS2064 and HS21218 control panels. *Note - Only keypad version 1.4 or higher is compatible with PowerSeries Pro.
Item#:
HS2LCDPS N
You must be logged in to order this item.
Log in here
An "active" RS-485 data bus hub designed for jobs where an M1Gold or M1EZ8 Control is retrofitting an older panel that has multiple homerun 4 conductor keypad/data wires. It splits the main 485 data bus into 4 managed 485 branches. Each branch can have 2 parallel home run cables for a total of 8 home runs. The end of each cable is EOL terminated to insure proper operation and supervision.
Includes:
- ELK-M1DBHR Data Bus Hub
- ELK-SWG Circuit Board Mounting Glides
- Instructions
- Splits The Controls' RS-485 Data Bus Output Into 4 Managed Branches
- Each Managed Branch Can Have 2 Parallel Home Run Cables (Total Of 8 Home Runs)
- EOL Termination Of Each Branch Insures Proper Operation And Supervision
- Works With Std. 4 Conductor Home Run Wire
- An Additional Unit May Be Connected In Parallel To The Control For Expanding Total Capacity
- Includes Mounting Rails for ELK-SWB Boxes
- Inputs: Elevator Screw Terminals, 4 Position
- Output: Elevator Screw Terminals, 4 Position
- Circuit Board Dimensions: 4.9 in. x 2.75 in.
Item#:
M1DBHR
You must be logged in to order this item.
Log in here
Features:
- Backlit numeric/symbol display
- Easy, universal-comprehension
- Actual Visual & Audible Transmitter
- Signal Strength Metering
- 3 Built-in Panic buttons, including programmable fire
- Concealed zone directory
- For use with Gemini GEM-P800 Hardwire/Wireless Controls
Item#:
GEM-RP8
You must be logged in to order this item.
Log in here
The M1XSLZW is a specialized Elk-M1 serial expander for connecting an M1 Control to Z-Wave enabled devices through a Leviton VRC0P+3 Z-Wave Serial Interface. Z-Wave is a wireless, low power, "mesh" network technology widely used for automating devices such as: Lights, Thermostats, Electronic Locks, etc. Z-Wave empowers devices to be remotely controlled from across the room or across the world with benefits such as energy savings, convenience, and comfort.
The VRC0P+3 is known as a Z-Wave Secondary Controller. It must be included as a permanent member of the Z-Wave network as its job is to maintain contact with all Z-Wave devices. It communicates via RS232 to the M1XSLZW which translates the protocol into the M1 control. This allows commands to be sent and received on the Z-Wave network.
- Activity/Status LED (Orange)
- Auto-Reset Hardware Watchdog Circuit
- Addressable (1-7) TYPE 5 Databus ID
- Connection to VRC0P+3: DB9M 9 Pin Port
- Connection to M1: Elevator Screw Terminals (4)
- Operating Voltage: 12 Volts D.C.
- Current Draw: 31mA
- Housing: 4.25" x 6.375" x 2.125"
- Circuit Board: 2.25" x 3.95"
Item#:
M1XSLZW
You must be logged in to order this item.
Log in here
Features:
- Deluxe 32-character backlit dual-line display +alpha directory
- Custom alphanumeric zone directory
- Built-in 2 zone expansion module
- Display of wireless transmitter signal strength
- EZ Keypad Programming2 with actual Q&A's to step through configuration New intuitive, stay & away ease-of-use buttons, for easy one button arm and easy "instant" (hold-down)
- Large soft touch backlit keys with tone
- Backlit displays for easy reading
- Wireless transmitter signal strength indication
- Decor friendly soft white design
- Fire, police and auxiliary programmable panic keys
- Fingertip reference chart
Item#:
GEM-RP8LCD
You must be logged in to order this item.
Log in here
Compatible with HS2016, HS2032, HS2064, HS2128, HS3032 and HS3128 control panels.
Item#:
HS2LCD N
You must be logged in to order this item.
Log in here
Allows a proximity card or fob to be used with the ELK-M1KP and ELK-M1KPB Keypads to quickly arm, disarm, operate a door strike, etc. Ideal for higher security installations and as an alternative to remembering PIN codes. Plugs into back of the Keypad. Uses M1PRC cards or M1PRF fobs. Includes one prox card.
- Simple Plug-in Installation
- Compatible with Clamshell Style (Credit Card size) Proximity Cards (ELK-M1PRC)
- Compatible with Keychain Style Proximity Fobs (ELK-M1PRF)
- Low Current Draw
- Substitutes for User Code Pin Entry Reader Format: 26 bit Wiegand
- 5 Pin Plug-in Connector
- Operating Voltage: 5 VDC from Keypad
- Current Draw: ~20 mA.
- Size: 1.875" W x 1" H x .375" D
Item#:
M1PR
You must be logged in to order this item.
Log in here
NEO ICON Hardwired Keypad with Prox Support. Compatible with the HS2016, HS2032, HS2064 and HS2128 control panels.
Features
- Up to 128 hardwired or wireless zones supported
- Modern, slim-line landscape keypad
- White backlit keys
- Blue LCD display
- 5 programmable function keys
- Input/Output terminal
- Fire, medical and panic keys
- Adjustable backlight and keypad buzzer
- Available with English function keys
- Proximity with MPT mini prox tags
Item#:
HS2ICNP
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)