S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The ELK-P212S is a Supervised Remote Power Supply / Battery Charger, providing 12 VDC output with up to 2 Amps of total current. It supervises the AC Power Input as well as the rechargeable Battery, and can report abnormal conditions back to an ELKM1 Control over the RS485 four (4) wire data bus. It also features relay outputs for AC and Low Battery to allow "stand-alone" operation with other Controls (Security, Access, CCTV products, etc.). Power from the P212S can be used to increase the capacity of a control, or to remotely power devices such as motion detectors, keypads, zone expanders, sirens, annunciators, etc.
- Regulated 12VDC Output with up to 2 Amps of current
- Energy Efficient ESMT - Elk Switch Mode Technology ensures low idle power with maximum output headroom
- Automatic output over-current protection (PTC)
- Master AC and Battery ON / OFF Power Switch
- Visual AC Power Indicator
- Innovative EBT - Elk Battery Technology circuit provides maximum battery life
- Controlled charge ramp and maintenance algorithm
- Low Battery cut-off protects battery from deep discharge
- M1 Control allows:
- Remote power reset of powered peripherals
- Data-bus supervision of AC and Battery status
- Stand-alone flexibility:
- Two (2) sets of DC outputs
- One (1) on-board relay to supervise battery status
- One (1) on-board relay to supervise AC status
- AC Input: 16.5VAC, 45VA (ELK-TRG1640 or equiv.)
- DC Output Voltage: 13.8 Volts D.C. +/- 5%
- Current Rating: 2.0 Amps
- Wattage: 30 Watts
- DC Output Protection: Auto Resetting PTC
- Rechargeable Battery Size: Max. 12 Ah
- Low Battery Cutoff Threshold: ~10 Volts.
- Load Regulation: + / - 2%
Item#:
P212S
You must be logged in to order this item.
Log in here
The ELK-P1215K Power Supply/Battery Charger Kit is a plug-in 14VDC Power Supply (ELK-P1417) combined with an intelligent Charger Board and a 12V 5Ah Battery(ELK-1250). It can supply up to 1.5 Amps of current at 12VDC (nominal). The charger board features a Low Battery Supervision output, Low Battery Cutoff, as well as a Manual On/Off switch. The Power Supply features built-in overload reset and screw terminals for connections.
- Auto-Resetting Overload Protection
- Built-In Battery Charging Circuit
- Low Battery Trouble Output
- Low Battery Deep Discharge Cutoff Protection
- Master Power Switch
- Power Supply Input: 14 Volts DC provided by ELK-P1417
- Continuous Output Current: 1.5 Amps. **
- Low Battery Trouble: 11 Volts. (nominal)
- Low Battery Cutoff: 9 Volts. (nominal)
- PC Board Size: 2.25" X 2.5" (57.15mm X 63.5mm )
- Standby Battery Charging Capacity: 1 to 12 Ah, Sealed Lead Acid
- Battery Wire Length: 16" with F1-Faston No. 187 Receptacles
- Master Power Switch turns On/Off the DC Input and Battery
Item#:
P1215K
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)