|◀ ◀ 337 - 348 of 433 ▶ ▶|
View:

Power Supply Charger, Single Output, 12/24VDC @ 6A, 115VAC, Board

OLS180 power supply/charger converts a 115VAC, 50/60Hz input into a 12VDC or 24VDC output @ 6A continuous supply current (see specifications). This unit has a wide range of applications for access control and security system accessories that require additional power.

Features:

  • Power ON/OFF switch.
  • Includes battery leads.
Specifications:
  • Input:
    • 115VAC, 50/60Hz, 1.9A.
    Output:
    • 12VDC or 24VDC selectable output.
    • 6A continuous supply current.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
    Battery Backup:
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
    Supervision:
    • AC fail supervision (form C contacts).
    • Low battery supervision (form C contacts).
    Visual Indicators:
    • AC input and DC output LED indicators.
    Electrical:
    • Temperature:
      • Operating: 0° C to 49° C (32° F to 120° F).
      • Storage: - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity 85% +/- 5%.
      • BTU/Hr (approx.):
        • 12VDC: 37 BTU/Hr.
        • 24VDC: 74 BTU/Hr.
    • System AC input VA requirement: 218.5VA.

    • Item#:
    OLS180
    You must be logged in to order this item. Log in here

    29 VAC, 4.2 Amp, Class 1, Open Frame

    Item#:
    T-29V120A
    You must be logged in to order this item. Log in here

    UL Power Supply

    The PS3002 is a 12-volt, 1.9-ampere continuous regulated power supply. Designed to support numerous control panels, the module increases the panels available standby current and provides an ac-only mode of operation as required by UL and NFPA for residential fire applications. A 50VA, 16.5-volt transformer and all required mounting hardware are supplied.

    The PS3002 is UL listed for Central Station, Police Station Connect, Household Fire and Household Burglar Alarm System Units. (For UL Certified installations, the PS3002 must be wired as part of a supervised system.

    In the ac-only mode, the PS3002 can supply auxiliary and/or siren current up to a maximum total of 1.9 ampereswhere the auxiliary current from the PS3002 does not exceed 1.4 amperes.

    Item#:
    PS3002
    You must be logged in to order this item. Log in here

    MAXSYS Power Supply/4-Relay Output/COMBUS Extender Module

    Features:

    • Connect up to 16 modules
    • 4 programmable form C relays at 2 Amps @ 30 VDC
    • Fully supervised for AC failure, low battery and AUX failure

    Item#:
    PC4204CX
    You must be logged in to order this item. Log in here

    24/28 VAC, 25/20 AMP, 16 Pwr L td Outputs, 2U, Listed

    Item#:
    RM-2816-600
    You must be logged in to order this item. Log in here

    POWR DISTRBUTN UNIT W/CKT BRKR dule - Converts AC or DC power

    Item#:
    PD8CB
    You must be logged in to order this item. Log in here

    12/24 VDC 6A WH/PROOF PWR SPLY r 24VDC @ 6 amp.

    Item#:
    SMP7WP
    You must be logged in to order this item. Log in here

    24 VAC, 1.6 Amp, Class 2, Plug in

    Item#:
    T-24V40
    You must be logged in to order this item. Log in here

    Power Supply & Charger Battery Kit, 1.5A @12VDC

    The ELK-P1215 Power Supply/Battery Charger Kit is a plug-in 14VDC Power Supply (ELK-P1417) combined with an intelligent Charger Board. It can supply up to 1.5 Amps of current at 12VDC (nominal). The charger board features a Low Battery Supervision output, Low Battery Cutoff, as well as a Manual On/Off switch. The Power Supply features built-in overload reset and screw terminals for connections.
    • Auto-Resetting Overload Protection
    • Built-In Battery Charging Circuit
    • Low Battery Trouble Output
    • Low Battery Deep Discharge Cutoff Protection
    • Master Power Switch
    • Power Supply Input: 14 Volts DC provided by ELK-P1417
    • Continuous Output Current: 1.5 Amps. **
    • Low Battery Trouble: 11 Volts. (nominal)
    • Low Battery Cutoff: 9 Volts. (nominal)
    • PC Board Size: 2.25" X 2.5" (57.15mm X 63.5mm )
    • Standby Battery Charging Capacity: 1 to 12 Ah, Sealed Lead Acid
    • Battery Wire Length: 16" with F1-Faston No. 187 Receptacles
    • Master Power Switch turns On/Off the DC Input and Battery
    Item#:
    P1215
    You must be logged in to order this item. Log in here

    12 VDC 1A ,24 VDC 500mA P/S CH 1 amp or 24VDC @ 500 mA, 115V

    Item#:
    OLS20
    You must be logged in to order this item. Log in here

    12 VDC, 8 A & 24 VDC, 8 A w/ 1 6 relay & 20 constant otpts, X

    Item#:
    PS-12408-UL-1620N
    You must be logged in to order this item. Log in here

    24 VDC, 4 controlled output re placement distribution board,

    Item#:
    RB-24-UL-4N
    You must be logged in to order this item. Log in here
    |◀ ◀ 337 - 348 of 433 ▶ ▶|
    View:
    (Denotes required field.)